View source for Connect Multiple SIMH Network Instances on one Computer

It is a known problem that you can run multiple instances of [[SIMH]] simulators on one computer, but cannot connect the network interfaces of those simulators directly.

You can either use multiple computers connected by a LAN to solve this, or do a special network setup.

Unfortunately I can only show you how to do this on Debian [[Linux]], with other Linux distributions it's probably similar. Windows: I don't know, sorry!

You may have to install some packages beforehand one time only (depending on your Debian configuration):

 sudo apt install uml-utilities bridge-utils tcpdump 

Run the following shell script as root:

 #!/bin/sh
 
 # Create four virtual tap network interfaces
 tunctl -t tap0
 tunctl -t tap1
 tunctl -t tap2
 tunctl -t tap3
 
 # Create a virtual bridge
 brctl addbr br0
 brctl setfd br0 0
 
 # Connect the four virtual interfaces to the virtual bridge
 brctl addif br0 tap0
 brctl addif br0 tap1
 brctl addif br0 tap2
 brctl addif br0 tap3
 
 # Do a minimal configuration for the virtual interfaces
 ifconfig tap0 0.0.0.0
 ifconfig tap1 0.0.0.0
 ifconfig tap2 0.0.0.0
 ifconfig tap3 0.0.0.0
 
 # Activate the virtual bridge
 ip link set br0 up
 
 # Activate the virtual interfaces
 ifconfig tap0 up
 ifconfig tap1 up
 ifconfig tap2 up
 ifconfig tap3 up

 # Show virtual bridge configuration
 brctl show
 
 # Show interfaces
 ip link  

The settings will not survive a reboot.

This setup connects the four virtual interfaces '''tap0''', '''tap1''', '''tap2''', and '''tap3''' among themselves, but neither to the local computer nor to any other connected computers.

You can watch the network traffic on any of the virtual interfaces with the following command (just replace the interface name):

 tcpdump -i tap0

You must be root to do this or prepend the command with '''sudo'''.

Use this SIMH command to attach to e.g. virtual interface '''tap0''', e.g.:
 attach xq tap:tap0

See the SIMH [https://github.com/simh/simh/blob/master/0readme_ethernet.txt 0readme_ethernet.txt] for more info on the same topic.

[[Category:SIMH Tutorials]]