Alternating current

From Computer History Wiki
Revision as of 01:54, 14 December 2018 by Jnc (talk | contribs) (+cat)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Alternating current (often abbreviated as AC) refers to the voltage (and thus the current) pattern used in one of the two main methods of carrying power (the other being so-called direct current, or DC).

In AC, the voltage starts at zero, increases to a positive peak, levels off, returns to zero, then goes negative, reaches a nagative peak, levels off again, and then returns to zero; the cycle then repeats the sinusoidal pattern. The speed of this alteration is the frequency of the alternating current.

AC is preferred over DC for power transmission since i) resistive losses are reduced when power is transmitted at high voltages (since resistive losses go as I^2*R), so high voltages are preferred for transmission of power, and ii) transformers are simple, passive devices which can easily convert high voltages down to the safer low voltages better for actual use and consumption - but transformers only work with AC.