Difference between revisions of "BA11 mounting boxes"

From Computer History Wiki
Jump to: navigation, search
(Add -E)
(add BA11-B)
(2 intermediate revisions by the same user not shown)
Line 5: Line 5:
 
They included:
 
They included:
  
* [[BA11 Mounting Box|BA11]] - the first, used in the [[PDP-11/20]]
 
 
* [[BA11-A mounting box|BA11-A]] - the terminal letter notwithstanding, a late unit, used for the [[PDP-11/44]]
 
* [[BA11-A mounting box|BA11-A]] - the terminal letter notwithstanding, a late unit, used for the [[PDP-11/44]]
 +
* BA11-B - mentioned briefly in some early documentation; the details of what it was are still unclear
 +
* [[BA11-C Mounting Box|BA11-C]] - the first, used in the [[PDP-11/20]]
 
* [[BA11-D Mounting Box|BA11-D]] - used for the [[PDP-11/05]] and early [[PDP-11/40]]'s
 
* [[BA11-D Mounting Box|BA11-D]] - used for the [[PDP-11/05]] and early [[PDP-11/40]]'s
* [[BA11-E Mounting Box|BA11-E]] - used for the [[PDP-11/05]]
+
* [[BA11-E Mounting Box|BA11-E]] - expansion box, used with the early [[PDP-11]]s
 
* [[BA11-F Mounting Box|BA11-F]] - used in the larger [[UNIBUS]] -11's like the [[PDP-11/45]]
 
* [[BA11-F Mounting Box|BA11-F]] - used in the larger [[UNIBUS]] -11's like the [[PDP-11/45]]
 
* [[BA11-K mounting box|BA11-K]] - used to hold both [[Central Processing Unit|CPUs]] as well as [[device controller]]s for UNIBUS -11's
 
* [[BA11-K mounting box|BA11-K]] - used to hold both [[Central Processing Unit|CPUs]] as well as [[device controller]]s for UNIBUS -11's
 
* [[BA11-L mounting box|BA11-L]] - ditto
 
* [[BA11-L mounting box|BA11-L]] - ditto
  
The -F was a 21" box, and the -E and -L were 5-1/4"; the rest were all 10-1/2".
+
The -F was a 21" box, and the -E and -L were 5-1/4"; the rest were all 10-1/2". All of them other than the earliest -C and -E models provided the standard [[DEC power distribution connectors]]; the 9-[[pin]] version in the -D, and the 6/15 version in the others.
  
 
There were also several boxes in the BA11 series which held [[DEC card form factor|quad]] [[QBUS]] backplanes:
 
There were also several boxes in the BA11 series which held [[DEC card form factor|quad]] [[QBUS]] backplanes:

Revision as of 02:42, 7 February 2019

The BA11 is the name for a series of hex system unit backplane mounting boxes for the H960 series of 19"-wide racks produced by DEC. Although they were intended to principally be rack-mounted, many were available in table-top configuration as well.

The H960 racks provided 63" of vertical mounting space, divided into units of 10-1/2", which were further sub-dividable into a pair of 5-1/4" spaces. The BA11 mounting boxes were designed for these spaces.

They included:

The -F was a 21" box, and the -E and -L were 5-1/4"; the rest were all 10-1/2". All of them other than the earliest -C and -E models provided the standard DEC power distribution connectors; the 9-pin version in the -D, and the 6/15 version in the others.

There were also several boxes in the BA11 series which held quad QBUS backplanes:

These were all 5-1/4" high.