Difference between revisions of "Installing 4.1c BSD on SIMH"

From Computer History Wiki
Jump to: navigation, search
(Booting the emulator)
(Booting the emulator)
Line 106: Line 106:
 
#
 
#
 
</pre>
 
</pre>
 
4.1c BSD is booted from '''miniroot'''.
 
  
 
=== Restoring the rootdump ===
 
=== Restoring the rootdump ===

Revision as of 15:43, 5 August 2017

This is the procedure that I have used to install 4.1c BSD onto SIMH's vax 11/780 emulator.

Work in progress, do not use this instruction!

Requirements

You will need the following materials to put together a 4.1c BSD installation:

  • A working zip tool to extract .zip files
  • A method of extracting the boot file from either the binaries (tar/gzip) or uudecode to extract it from here.
  • A compiled binary of vax780 from SIMH, along with the vmb.exe again from SIMH.

You will need the following files from Bitsavers archive from the 4.1 directory. I have used the files:

Preparing for installation

Extract these .zip archive files. You will get a prepared .tap files (a SIMH tape images) and a folder with "bursts". This is just a binary images extracted from tape. We need a 4.1c BSD miniroot:

% cp 4.1C_BSD_1of2/burst/00001 miniroot
%file  miniroot
miniroot: Unix Fast File system (little-endian), last mounted on /mnt,
last written at Tue Apr  5 02:43:45 1983, clean flag 0, number of blocks 2048,
number of data blocks 1903, number of cylinder groups 1, block size 8192,
fragment size 1024, minimum percentage of free blocks 10, rotational delay 2ms,
disk rotational speed 65rps, TIME optimization

Next you will need the boot program. I have uploaded a copy onto this wiki in uuencoded format. To decode it, simply access the article, and copy the contents of the quoted text (the begin/end part INCLUDING the begin & end segments) and save it to a text file. Then you will need to run the uudecode file as follows:

% ls -l boot42.uue
-rw-r--r--  1 Neozeed  None_ploc  9117 Feb  6 12:09 boot42.uue
% uudecode boot42.uue
% ls -l boot42
-rw-------  1 Neozeed  None_ploc  6600 Feb  6 12:28 boot42
% file boot42
boot42: data

Boot 1.

We are going to use the following config file to start the first phase of the installation. Save the following configuration into a file such as 'install.ini'. Since we are going to boot directly into the miniroot the rq1 disk will hold the installation target. Since the 'normal' way to install is to install from tape onto the first disk, we will have to add a device file upon boot for the second disk.

install.ini

set rq0 ra81
at rq0 miniroot
set rq1 ra81
at rq1 rq.dsk
;
set rq2 dis
set rq3 dis
set rp dis
set lpt dis
set rl dis
set tq dis
set tu dis
att ts 4.1C_BSD_1of2.tap
set tti 7b
set tto 7b
load -o boot42 0
d r10 9
d r11 0
run 2

Booting the emulator

You then simply run the emulator and pass it the config file.

C:\41cBSD>vax780 install.ini

VAX 11/780 simulator V4.0-0 Beta        git commit id: 7ed68aed
RQ1: creating new file
loading ra(0,0)boot
Boot
: ra(0,0)vmunix
215688+63964+69764 start 0xf98
4.1c BSD UNIX #1: Sun Mar 27 14:48:45 PST 1983
real mem  = 8384512
avail mem = 7036928
using 148 buffers containing 838656 bytes of memory
mcr0 at tr1
mcr1 at tr2
uba0 at tr3
hk0 at uba0 csr 177440 vec 210, ipl 15
rk0 at hk0 slave 0
rk1 at hk0 slave 1
uda0 at uba0 csr 172150 vec 774, ipl 15
ra0 at uda0 slave 0
ra1 at uda0 slave 1
zs0 at uba0 csr 172520 vec 224, ipl 15
ts0 at zs0 slave 0
dz0 at uba0 csr 160100 vec 300, ipl 15
dz1 at uba0 csr 160110 vec 310, ipl 15
dz2 at uba0 csr 160120 vec 320, ipl 15
dz3 at uba0 csr 160130 vec 330, ipl 15
root on ra0
WARNING: clock gained 122 days -- CHECK AND RESET THE DATE!
WARNING: should run interleaved swap with >= 2Mb
erase ^?, kill ^U, intr ^C
#

Restoring the rootdump

From here we are now running from the miniroot. The next steps are as follows:

# disk=ra type=ra81 tape=ts xtr

This will create a 'device' for the ra1 disk, then run the xtr program to restore the root dump.

# disk=ra type=ra81 tape=ts xtr
Build root file system
Warning: 538 sector(s) in last cylinder unallocated
/dev/ra0a:      15884 sectors in 23 cylinders of 14 tracks, 51 sectors
        8.1Mb in 2 cyl groups (16 c/g, 5.85Mb/g, 1856 i/g)
super-block backups (for fsck -b#) at:
 32, 11520,
WRITE THESE NUMBERS DOWN!!!
fsck depends on them to recover this file system.
newfs: /usr/mdec/a0boot: No such file or directory
Check the file system
** /dev/rra0a
** Last Mounted on
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
2 files, 9 used, 7420 free (20 frags, 925 blocks)
Rewind tape
Restore the dump image of the root
** /dev/rra0a
** Last Mounted on /a
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
257 files, 3338 used, 4091 free (19 frags, 509 blocks)
Root filesystem extracted

If this is a 780, update floppy
If this is a 730, update the cassette
#

After this stage, I just sync the disk a few times, then halt the emulator (CONTROL+E) and exit out. Now we are ready for stage two.

If this is a 730, update the cassette
# sync
# sync
# sync
#
Simulation stopped, PC: 80001416 (FFS #0,#20,80044C3C,R0)
sim> q
Goodbye

C:\4.2BSD\work>


Boot 2.

Now that the install disk is prepared, we need to use a different config file to reflect us going back to a single disk/tape configuration. The new configuration is as follows:

boot.ini

set rq0 ra81
att rq0 rq.dsk
set rq1 dis
set rq2 dis
set rq3 dis
set rp dis
set lpt dis
set rl dis
set tq dis
set tu dis
att ts 4.1C_BSD_1of2.tap
set tti 7b
set tto 7b
load -o bootra 0
d r10 9
d r11 0
run 2

Booting the emulator

Now boot up the emulator with the boot.ini

C:\4.2BSD\work>vax780.exe boot.ini

VAX 11/780 simulator V4.0-0 Beta        git commit id: b8049645
loading ra(0,0)boot
Boot
: ra(0,0)vmunix
215688+63964+69764 start 0xf98
4.1c BSD UNIX #1: Sun Mar 27 14:48:45 PST 1983
real mem  = 8384512
avail mem = 7036928
using 148 buffers containing 838656 bytes of memory
mcr0 at tr1
mcr1 at tr2
uba0 at tr3
hk0 at uba0 csr 177440 vec 210, ipl 15
rk0 at hk0 slave 0
rk1 at hk0 slave 1
uda0 at uba0 csr 172150 vec 774, ipl 15
ra0 at uda0 slave 0
ra1 at uda0 slave 1
zs0 at uba0 csr 172520 vec 224, ipl 15
ts0 at zs0 slave 0
dz0 at uba0 csr 160100 vec 300, ipl 15
dz1 at uba0 csr 160110 vec 310, ipl 15
dz2 at uba0 csr 160120 vec 320, ipl 15
dz3 at uba0 csr 160130 vec 330, ipl 15
root on ra0
WARNING: should run interleaved swap with >= 2Mb
Automatic reboot in progress...
Thu Feb  3 00:16:22 PST 1983
Can't open checklist file: /etc/fstab
Automatic reboot failed... help!
erase ^?, kill ^U, intr ^C
#

Preparing the disk

Now we have to prep the machine for both the tape, and the type of disk. Type in the following commands.

# disk=ra
# name=ra0h;type=ra81
# cd /dev
# ./MAKEDEV ra0;sync
# cd /
# newfs -v ra0h ra81

The output will be like this:

# disk=ra
# name=ra0h;type=ra81
# cd /dev
# ./MAKEDEV ra0;sync
# cd /
# newfs -v ra0h ra81
/etc/mkfs /dev/ra0h 291346 51 14 4096 512 16 10 60
Warning: 680 sector(s) in last cylinder unallocated
/dev/ra0h:      291346 sectors in 409 cylinders of 14 tracks, 51 sectors
        149.2Mb in 26 cyl groups (16 c/g, 5.85Mb/g, 2048 i/g)
super-block backups (for fsck -b#) at:
 32, 11512, 22992, 34472, 45952, 57432, 68912, 80392, 91872, 103352,
 114832, 126312, 137792, 149272, 160752, 172232, 182816, 194296, 205776, 217256,
 228736, 240216, 251696, 263176, 274656, 286136,
WRITE THESE NUMBERS DOWN!!!
fsck depends on them to recover this file system.
#

Restoring the usr slice

The disk's /usr slice will not have been formatted. We can not go ahead and mount it, and restore the /usr files. Then we unmount the slice, and run fsck to make sure everything is ok.

# mount /dev/$name /usr
# cd /usr
# mkdir sys
# cd sys
# mt rew
# mt fsf 3
# tar xpbf 20 /dev/rmt12
# cd ..
# mt fsf
# tar xpbf 20 /dev/rmt12
# cd /
# chmod 755 / /usr /usr/sys
# rm -rf sys
# ln -s /usr/sys sys
# umount /dev/ra0h
# fsck /dev/ra0h

Likewise, the output should be similar to this:

# chmod 755 / /usr /usr/sys
# rm -rf sys
# ln -s /usr/sys sys
# umount /dev/$name
# fsck /dev/r$name
** /dev/rra0h
** Last Mounted on /usr
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
3070 files, 43917 used, 233460 free (284 frags, 29147 blocks)
#

Configuring the fstab

Now we just need to create the fstab, format the 'home' slice, and then we can reboot the emulator into multiuser mode. Enter in the following commands:

# cd /etc
# cp fstab.ra81 fstab
# newfs ra0g ra81
# sync
# reboot

And the expected output is as follows:

# cd /etc
# cat > /etc/fstab
/dev/ra0a:/:rw:1:1
/dev/ra0h:/usr:rw:1:2
^D
# sync
# reboot
syncing disks... done

Reboot requested, PC: 80021716 (ADDL2 #8,SP)
sim> q
Goodbye

First Multiuser Boot

Now we can just re-run the last command, and we should boot multiuser! By default there is no root password. Also the system will run fsck uppon boot, so depending on your host computer this could take a while.


C:\4.2BSD\work>vax780.exe boot.ini

VAX 11/780 simulator V4.0-0 Beta        git commit id: b8049645
loading ra(0,0)boot
Boot
: ra(0,0)vmunix
215688+63964+69764 start 0xf98
4.1c BSD UNIX #1: Sun Mar 27 14:48:45 PST 1983
real mem  = 8384512
avail mem = 7036928
using 148 buffers containing 838656 bytes of memory
mcr0 at tr1
mcr1 at tr2
uba0 at tr3
hk0 at uba0 csr 177440 vec 210, ipl 15
rk0 at hk0 slave 0
rk1 at hk0 slave 1
uda0 at uba0 csr 172150 vec 774, ipl 15
ra0 at uda0 slave 0
ra1 at uda0 slave 1
zs0 at uba0 csr 172520 vec 224, ipl 15
ts0 at zs0 slave 0
dz0 at uba0 csr 160100 vec 300, ipl 15
dz1 at uba0 csr 160110 vec 310, ipl 15
dz2 at uba0 csr 160120 vec 320, ipl 15
dz3 at uba0 csr 160130 vec 330, ipl 15
root on ra0
WARNING: should run interleaved swap with >= 2Mb
Automatic reboot in progress...
Thu Feb  3 00:26:16 PST 1983
/dev/rra0a: 283 files, 3325 used, 4104 free (16 frags, 511 blocks)
/dev/rra0h: 3072 files, 43931 used, 233446 free (278 frags, 29146 blocks)
Thu Feb  3 00:26:16 PST 1983
local daemons: telnetd ftpd tftpd syslog sendmail.
preserving editor files
clearing /tmp
standard daemons: update cron accounting berknet mail printer.
starting network: rshd rexecd rlogind rwhod routed.
Thu Feb  3 00:26:17 PST 1983

ucbmonet login: 


Now we can simply logon as root.

ucbmonet login: root
Last login: Thu Feb  3 00:25:49 on console
4.1c BSD UNIX #1: Sun Mar 27 14:48:45 PST 1983
Master source now lives here; freeze your 4.1c stuff now.
monet#

From here you can explore the system. All of the man pages are installed, and there is enough of a base system to get going. Sadly there are bugs in how 4.2 BSD and how SIMH interact with the networking, and it is not reliable. As sad as it is to be an 'island' you can however setup the dz serial interface to allow more than one user.

Enabling remote users

You can add the following lines into the boot.ini (just make sure they are above the boot command or it'll not work correctly..). This will allow for 8 users to connect on tcp port 8888.

set dz lines=8
set dz 7b
att dz -m 8888

I would also recommend to windows users, either putty, or syncterm. The default telnet client sucks.