Difference between revisions of "Light pen"

From Computer History Wiki
Jump to: navigation, search
(Stubby, but an OK start)
 
m (typo)
Line 1: Line 1:
The '''light pen''' (called the '''light gun''' in its initial implementation) is an early pointing device used with a [[graphical user interface]].
+
The '''light pen''' (called the '''light gun''' in its initial implementation) was an early pointing device used with a [[graphical user interface]].
  
 
It was invented on the [[Whirlwind]] computer when early experience with a [[joystick]] showed that it was slow and difficult to zero in on a selected item.
 
It was invented on the [[Whirlwind]] computer when early experience with a [[joystick]] showed that it was slow and difficult to zero in on a selected item.
  
The initial implementation was simply a light-senstive sensor, a phototube, connected to the computer; it was held up to the [[cathode ray tub|CRT]] [[display]]. When the beam illuminated the spot on the screen in front of the light gun, it produced a pulse from the sensor, which the computer could detect, and correlate with the location of the beam.
+
The initial implementation was simply a light-senstive sensor, a phototube, connected to the computer; it was held up to the [[cathode ray tube|CRT]] [[display]]. When the beam illuminated the spot on the screen in front of the light gun, it produced a pulse from the sensor, which the computer could detect, and correlate with the location of the beam.
  
 
Later implementations used a smaller sensor in a pen-sized housing, hence the later name.
 
Later implementations used a smaller sensor in a pen-sized housing, hence the later name.
  
 
{{stub}}
 
{{stub}}

Revision as of 18:45, 15 September 2018

The light pen (called the light gun in its initial implementation) was an early pointing device used with a graphical user interface.

It was invented on the Whirlwind computer when early experience with a joystick showed that it was slow and difficult to zero in on a selected item.

The initial implementation was simply a light-senstive sensor, a phototube, connected to the computer; it was held up to the CRT display. When the beam illuminated the spot on the screen in front of the light gun, it produced a pulse from the sensor, which the computer could detect, and correlate with the location of the beam.

Later implementations used a smaller sensor in a pen-sized housing, hence the later name.