Difference between revisions of "PC04/PC05 High-Speed Paper-Tape Reader/Punch"

From Computer History Wiki
Jump to: navigation, search
(Variants: Mention no 50Hz reader-onlly versions)
(Variants: no punch-only for 8/I)
Line 14: Line 14:
  
 
* PC04-B, PC04-C - PDP-8, PDP-8/S (also the [[KA10]])
 
* PC04-B, PC04-C - PDP-8, PDP-8/S (also the [[KA10]])
* PC04-BB - PDP-8/I
+
* PC04-BB - PDP-8/I  
 
* PC04-BL - PDP-8/E, PDP-8/F, PDP-8/L, PDP-8/M
 
* PC04-BL - PDP-8/E, PDP-8/F, PDP-8/L, PDP-8/M
 +
 +
along with versions of the punch-only and reader-only models (except that documentation does not show a punch-only model for the -8/I).
  
 
There is also a special version of the reader/punch model for the [[KI10]], the PC04-CL. (The 50Hz versions of all of these differ in the last letter, which is incremented; e.g. the KI10 50Hz version is the -CM.)
 
There is also a special version of the reader/punch model for the [[KI10]], the PC04-CL. (The 50Hz versions of all of these differ in the last letter, which is incremented; e.g. the KI10 50Hz version is the -CM.)

Revision as of 00:43, 5 August 2018

The PC04 and PC05 Paper-Tape Reader/Punches are the DEC-supplied paper tape peripherals for the PDP-8 and PDP-11 respectively (the '05s were also used by the PDP-12 and PDP-15).

The mechanical portions are the same in the '04 and '05, but they differ in the control electronics included in them. Both include an electro-mechanical punch, and a photo-electric reader, which are completely separate, but housed in the same frame, and sharing a power supply.

There is also a backplane to hold the control electronics, in the form of a number of FLIP CHIPs. The backplane in the PC04 has 8 slots; that in the PC05 has 12 slots. (In addition, there is also a controller in the computer.)

Variants

There are a myriad of different versions, particularly in the '04. To start with, there are two generations of each: in the former, input data is strobed during reading by a signal from the stepper motor; the later strobes the data by sensing the feed holes.

There are also reader-only and punch-only models: the reader-punch model of the PC04 is the PC04B, the reader-only model is the PR04R, and the punch-only model is the PC04P; the reader-punch model of the PC05 is the PC05C, the reader-only model is the PR05R, and the punch-only model is the PC05P. All come in 50Hz and 60Hz versions (which are identical except for the punch pulley; so there are no 50Hz versions of the reader-only models).

Finally, there are different versions of the PC04 for different PDP-8 models (they differ as to which FLIP CHIPs are used, which will be given below):

  • PC04-B, PC04-C - PDP-8, PDP-8/S (also the KA10)
  • PC04-BB - PDP-8/I
  • PC04-BL - PDP-8/E, PDP-8/F, PDP-8/L, PDP-8/M

along with versions of the punch-only and reader-only models (except that documentation does not show a punch-only model for the -8/I).

There is also a special version of the reader/punch model for the KI10, the PC04-CL. (The 50Hz versions of all of these differ in the last letter, which is incremented; e.g. the KI10 50Hz version is the -CM.)

External links