Difference between revisions of "PC04/PC05 High-Speed Paper-Tape Reader/Punch"

From Computer History Wiki
Jump to: navigation, search
m (Minor copyedits)
(→‎Varsions: Add PC04 boards)
Line 9: Line 9:
 
There is also a [[backplane]] to hold the control electronics, which are a number of [[FLIP CHIP]]s. The backplane in the PC04 has 8 slots; that in the PC05 has 12 slots. (In addition, there is also a [[device controller|controller]] in the computer.)
 
There is also a [[backplane]] to hold the control electronics, which are a number of [[FLIP CHIP]]s. The backplane in the PC04 has 8 slots; that in the PC05 has 12 slots. (In addition, there is also a [[device controller|controller]] in the computer.)
  
−
==Varsions==
+
==Versions==
  
 
There are a myriad of different versions, in addition to the variants above, particularly in the '04.
 
There are a myriad of different versions, in addition to the variants above, particularly in the '04.
Line 26: Line 26:
  
 
The control switch array on the front panel differs between the reader-punch, reader-only, and punch-only versions; the PDP-10 versions have their own switch array formats.
 
The control switch array on the front panel differs between the reader-punch, reader-only, and punch-only versions; the PDP-10 versions have their own switch array formats.
 +
 +
==Electronics==
 +
 +
The tables below show the FLIP CHIPs used in each version; the location of boards which carry cables to and from the backplane are also shown. Cards used for the punch are shown in ''italics''; the others are for the reader. Reader-only and punch-only models will have only the associated cards.
 +
 +
PC04-B:
 +
 +
{| class="wikitable"
 +
! Slot !! B !! A
 +
|-
 +
| 1 || ''W077 Punch control cable'' || W077 Reader control cable
 +
|-
 +
| 2 || ''W023 Punch assembly cable'' ||  
 +
|-
 +
| 3 || W040 Solenoid driver ||  
 +
|-
 +
| 4 || W040 Solenoid driver ||  
 +
|-
 +
| 5 || W040 Solenoid driver ||  
 +
|-
 +
| 6 || W040 Solenoid driver || W512 Level converter
 +
|-
 +
| 7 || colspan="2" style="text-align:center;" | G918 Photo amplifier
 +
|-
 +
| 8 || W077 Reader photocell cable || W512 Level converter
 +
|}
 +
 +
PC04-BB:
 +
 +
{| class="wikitable"
 +
! Slot !! B !! A
 +
|-
 +
| 1 || ''W077 Punch control cable'' ||  
 +
|-
 +
| 2 || ''W023 Punch assembly cable'' || W077 Reader control cable
 +
|-
 +
| 3 || M040 Solenoid driver ||  
 +
|-
 +
| 4 || M040 Solenoid driver ||  
 +
|-
 +
| 5 || M040 Solenoid driver ||  
 +
|-
 +
| 6 || M040 Solenoid driver ||  
 +
|-
 +
| 7 || colspan="2" style="text-align:center;" | G918 Photo amplifier
 +
|-
 +
| 8 || W077 Reader photocell cable ||  
 +
|}
 +
 +
PC04-BL:
 +
 +
{| class="wikitable"
 +
! Slot !! B !! A
 +
|-
 +
| 1 || ''W033 Punch control cable'' || W033 Reader control cable
 +
|-
 +
| 2 || ''W023 Punch assembly cable'' ||  
 +
|-
 +
| 3 || M040 Solenoid driver || ''M040 Solenoid driver''
 +
|-
 +
| 4 || M040 Solenoid driver || ''M040 Solenoid driver''
 +
|-
 +
| 5 || M040 Solenoid driver || ''M040 Solenoid driver''
 +
|-
 +
| 6 || M040 Solenoid driver || ''M113 Ten 2-input NAND gates''
 +
|-
 +
| 7 || colspan="2" style="text-align:center;" | G918 Photo amplifier
 +
|-
 +
| 8 || W077 Reader photocell cable ||  
 +
|}
  
 
==External links==
 
==External links==

Revision as of 14:26, 5 August 2018

The PC04 and PC05 Paper-Tape Reader/Punches are the DEC-supplied paper tape peripherals for the PDP-8 and PDP-11 respectively. The '04 was also used by early PDP-10 models, and '05 by the PDP-12 and PDP-15.

The mechanical portions are the same in the '04 and '05 types, but they differ in the control electronics in them. Both types include an electro-mechanical punch, and a photo-electric reader, which are completely separate, but housed in the same frame, and share a power supply.

There are also reader-only and punch-only models: the reader-punch model of the PC04 is the PC04B, the reader-only model is the PR04R, and the punch-only model is the PC04P; the reader-punch model of the PC05 is the PC05C, the reader-only model is the PR05R, and the punch-only model is the PC05P.

All the models listed above come in 50Hz and 60Hz versions (which are identical except for the punch pulley; so there are no separate 50Hz versions of the reader-only models).

There is also a backplane to hold the control electronics, which are a number of FLIP CHIPs. The backplane in the PC04 has 8 slots; that in the PC05 has 12 slots. (In addition, there is also a controller in the computer.)

Versions

There are a myriad of different versions, in addition to the variants above, particularly in the '04.

To start with, there are two generations of each type: in the earlier, input data is strobed during reading by a signal from the stepper motor; the later strobes the data by sensing the feed holes.

There are also different versions of the PC04 for different PDP-8 models (they differ as to which FLIP CHIPs are used, per the table below):

  • PC04-B, PC04-C - PDP-8, PDP-8/S (also the KA10)
  • PC04-BB - PDP-8/I
  • PC04-BL - PDP-8/E, PDP-8/F, PDP-8/L, PDP-8/M

along with equivalent versions of the punch-only and reader-only models (except that documentation does not show a punch-only model for the -8/I).

There is also a special version of the reader/punch model for the KI10, the PC04-CL. (The 50Hz versions of all of these differ in the last letter, which is incremented; e.g. the KI10 50Hz version is the -CM.)

The control switch array on the front panel differs between the reader-punch, reader-only, and punch-only versions; the PDP-10 versions have their own switch array formats.

Electronics

The tables below show the FLIP CHIPs used in each version; the location of boards which carry cables to and from the backplane are also shown. Cards used for the punch are shown in italics; the others are for the reader. Reader-only and punch-only models will have only the associated cards.

PC04-B:

Slot B A
1 W077 Punch control cable W077 Reader control cable
2 W023 Punch assembly cable  
3 W040 Solenoid driver  
4 W040 Solenoid driver  
5 W040 Solenoid driver  
6 W040 Solenoid driver W512 Level converter
7 G918 Photo amplifier
8 W077 Reader photocell cable W512 Level converter

PC04-BB:

Slot B A
1 W077 Punch control cable  
2 W023 Punch assembly cable W077 Reader control cable
3 M040 Solenoid driver  
4 M040 Solenoid driver  
5 M040 Solenoid driver  
6 M040 Solenoid driver  
7 G918 Photo amplifier
8 W077 Reader photocell cable  

PC04-BL:

Slot B A
1 W033 Punch control cable W033 Reader control cable
2 W023 Punch assembly cable  
3 M040 Solenoid driver M040 Solenoid driver
4 M040 Solenoid driver M040 Solenoid driver
5 M040 Solenoid driver M040 Solenoid driver
6 M040 Solenoid driver M113 Ten 2-input NAND gates
7 G918 Photo amplifier
8 W077 Reader photocell cable  

External links

Retrieved from "https://gunkies.org/w/index.php?title=PC04/PC05_High-Speed_Paper-Tape_Reader/Punch&oldid=17243"