Difference between revisions of "RP02 disk drive"

From Computer History Wiki
Jump to: navigation, search
m (Avoid redir)
m (Bah. typo)
(One intermediate revision by the same user not shown)
Line 25: Line 25:
 
The '''RP02''' was the predecessor to the later [[RP03 disk drive|RP03]] multi-[[platter]] large [[disk]] drive.
 
The '''RP02''' was the predecessor to the later [[RP03 disk drive|RP03]] multi-[[platter]] large [[disk]] drive.
  
The actual drive was produced by Memorex - a model 660-2 - and [[Original Equipment Manufacturer|OEM]]'d by [[Digital Equipment Corporation|DEC]], who added interface electonics.
+
The actual drive was produced by Memorex - a model 660-2 - and [[Original Equipment Manufacturer|OEM]]'d by [[Digital Equipment Corporation|DEC]], who added interface [[electronic]]s.
  
 
A maximum of 8 drives were supported per controller.
 
A maximum of 8 drives were supported per controller.
  
{{stub}}
+
{{semi-stub}}
  
 
[[Category: DEC Disk Drives]]
 
[[Category: DEC Disk Drives]]

Revision as of 21:46, 20 October 2018


RP02
Manufacturer: Memorex (basic drive), Digital Equipment Corporation (electronics)
Drive Controller(s): RP10 (PDP-10)
Capacity: 23.3 Mbytes (formatted), 29 Mbytes (raw)
Transfer Rate: 7.4 usec/18-bit word
Average Access Time: 62.5 msec
Revolutions per Minute: 2400
1/2 Revolution Time: 12.5 msec
One Track Seek Time: 20 msec
Average Seek Time: 50 msec
Maximum Seek Time: 80 msec
Total Surfaces: 20 (11 platters)
Tracks per Surface: 203 (nominally 200 plus 3 spares)
Sectors per Track: 10
Words per Sector: 256 18-bit
Density: 2230 bpi (maximum)
Recording Method: double frequency, NRZ
Physical Size: 30" W x 39" H x 24" L
Weight: 295 pounds
Power Consumption: 1250 VA (running); 5200 VA (starting)


The RP02 was the predecessor to the later RP03 multi-platter large disk drive.

The actual drive was produced by Memorex - a model 660-2 - and OEM'd by DEC, who added interface electronics.

A maximum of 8 drives were supported per controller.