Difference between revisions of "SIMH"

From Computer History Wiki
Jump to: navigation, search
(Nova)
m (Support)
(13 intermediate revisions by 4 users not shown)
Line 1: Line 1:
[http://sourceforge.net/projects/simh/ SIMH] ([http://simh.trailing-edge.com/ home page])consists of simulators for about 20 different machines, and as such, is a very important emulator for anyone interested in computer history, in particular, that of [[DEC]] systems, as the PDPs and even the [[VAX]] is well emulated by it.  It can even emulate network interfaces for the [[PDP-10]], [[PDP-11]] and VAX, so the emulated systems can network directly onto the internet, if the emulated operating system supports it, like BSD or [[VMS]].
+
[http://sourceforge.net/projects/simh/ SIMH] ([http://simh.trailing-edge.com/ home page]) consists of simulators for about 20 different machines, and as such, is a very important emulator for anyone interested in computer history, in particular, that of [[DEC]] systems, as the PDPs and even the [[VAX]] are well emulated by it.  It can even emulate network interfaces for the [[PDP-10]], [[PDP-11]] and VAX, so the emulated systems can network directly onto the Internet, if the emulated operating system supports it, like BSD or [[VMS]].
  
SIMH was primarly written by Bub Supnik of Zork porting fame, and is now widely contributed by others as well.
+
SIMH was primarily written by Bob Supnik of Zork porting fame, and is now widely contributed to by others as well.
  
== Altair 8800 ==
+
The current version is 3.9-0, released on May 3rd, 2012.  More up to date developments may be found on their [https://github.com/simh/simh source code repository].
This is the Altair 8800 emulator with can run both AltairDOS and CP/M 2.2
 
  
== Altair Z80 ==
+
== Emulated Systems ==
 +
=== Altair 8800 ===
 +
This is the Altair 8800 emulator which can run both AltairDOS and CP/M 2.2
 +
 
 +
=== Altair Z80 ===
  
 
SIMH emulates the [[Altair]] architecture with your choice of either a [[Z80]] or [[Intel 8080]] processor.  It can run [[CP/M]].
 
SIMH emulates the [[Altair]] architecture with your choice of either a [[Z80]] or [[Intel 8080]] processor.  It can run [[CP/M]].
  
== HP2100 ==
+
=== Honeywell H316/H516 ===
 +
 
 +
Emulates the work horse behind the ARPANET IMPs. In 2013 the emulator was modified to bring up the original IMP code and connect them together (tunnelled over IP). Demo instructions are available in the latest source.  The IMP side of the 1822 is there, but there is not much of a host side yet. I don't see anything in simh that would be able to plug in anyway. An associated computer consultants (acc) 1822 card for the pdp-11 would be a start.
 +
 
 +
=== HP2100 ===
  
 
I really don't know much about this machine, but I included a way to run the basic1 program I found online.  It kind of reminds me of the ROMBASIC back 'in the day'... It's basic with line  numbers so I know it's kind of old..  I really don't know much otherwise about this machine.
 
I really don't know much about this machine, but I included a way to run the basic1 program I found online.  It kind of reminds me of the ROMBASIC back 'in the day'... It's basic with line  numbers so I know it's kind of old..  I really don't know much otherwise about this machine.
  
== Interdata 32b ==
+
=== Interdata 8/32 ===
  
The interdata 32bit micro was the first non [[PDP-11]] to run UNIX.  SIMH can run both v6 & v7 research editions for the Interdata.
+
The interdata 8/32 micro was the first non [[PDP-11]] to run UNIX.  SIMH can run both v6 & v7 research editions for the Interdata.
  
== Nova ==
+
=== Nova ===
  
 
SIMH can run [[RDOS]] 7.5 for the [[Nova]].
 
SIMH can run [[RDOS]] 7.5 for the [[Nova]].
  
== DEC PDP-1 ==
+
SIMH also includes [[Data General Eclipse]] support, but there is no available OS.
  
The original PDP-1 is emulated well, and a variety of software for it runs.
+
=== DEC PDP-1 ===
  
== DEC PDP-8 ==
+
The original [[PDP-1]] is emulated although most of the software is expected to be toggled from the console, or loaded from paper tape.  SIMH does not emulate the display needed for [[spacewar]].
 +
 
 +
=== DEC PDP-8 ===
  
 
The [[PDP-8]] was the first 'affordable' microcomputer... [[OS/8]] runs under SIMH.
 
The [[PDP-8]] was the first 'affordable' microcomputer... [[OS/8]] runs under SIMH.
  
== DEC PDP-11 ==
+
=== DEC PDP-10 ===
 +
 
 +
The [[PDP-10]] model KS processor is emulated and will run all but the latest versions of the [[TOPS-10]] and [[TOPS-20]] operating systems.
 +
 
 +
=== DEC PDP-11 ===
  
The [[PDP-11]] is emulated enough to run most PDP-11 OS's including the early unix (v1,4,5,6,7 are known to run).
+
The [[PDP-11]] is emulated enough to run most PDP-11 operating systems including the early Unixes (v1,4,5,6,7 are known to run).
  
== MicroVAX II ==
+
=== MicroVAX II ===
  
 
SIMH can run the [[MicroVAX II]] with as much as 256mb of emulated ram.  Both VMS, NetBSD, OpenBSD and original BSD can run on this emulator.  Additionally, the network adapter functions correctly under this emulator, unlike the [[VAX-11/780]].
 
SIMH can run the [[MicroVAX II]] with as much as 256mb of emulated ram.  Both VMS, NetBSD, OpenBSD and original BSD can run on this emulator.  Additionally, the network adapter functions correctly under this emulator, unlike the [[VAX-11/780]].
  
== VAX 11/780 ==
+
=== VAX 11/780 ===
 +
 
 +
SIMH can also emulate the first model of the VAX, the [[VAX-11/780]].  This is appropriate for older operating systems like VMS release 1.x and the original 32v, 3BSD and all 4BSD releases.
 +
 
 +
== Usage ==
 +
 
 +
SIMH can either take in configuration parameters interactively, or you can store them in a file.  If the file is the name of the emulator+.ini it will load them automatically (eg vax.exe loads vax.ini automatically).  The CONTROL+E key will break the emulation and bring you back to the SIMH console where you can alter the running state.
 +
 
 +
Networking is covered in the [[Networking with SIMH]] guide.
  
SIMH can also emulate the first model of the VAX, the [[VAX-11/780]].  This is appropriate for older OS's like VMS release 1.x and the original 32v, 3BSD and all 4BSD releases.
+
== Support ==
  
 +
While not immediately obvious, there is a mailing list here [http://mailman.trailing-edge.com/pipermail/simh/ http://mailman.trailing-edge.com/pipermail/simh/].  I would recommend searching the thing, and you'll be amazed how much good information there is in there.  Likewise, I'd recommend joining the list if you are interested in running SIMH.  You can join [http://mailman.trailing-edge.com/mailman/listinfo/simh here].  As 4.0 is still in beta, the [https://github.com/simh/simh public source repository] is also a great source of information.
  
  
 
[[Category:Emulators]]
 
[[Category:Emulators]]

Revision as of 04:17, 3 May 2015

SIMH (home page) consists of simulators for about 20 different machines, and as such, is a very important emulator for anyone interested in computer history, in particular, that of DEC systems, as the PDPs and even the VAX are well emulated by it. It can even emulate network interfaces for the PDP-10, PDP-11 and VAX, so the emulated systems can network directly onto the Internet, if the emulated operating system supports it, like BSD or VMS.

SIMH was primarily written by Bob Supnik of Zork porting fame, and is now widely contributed to by others as well.

The current version is 3.9-0, released on May 3rd, 2012. More up to date developments may be found on their source code repository.

Emulated Systems

Altair 8800

This is the Altair 8800 emulator which can run both AltairDOS and CP/M 2.2

Altair Z80

SIMH emulates the Altair architecture with your choice of either a Z80 or Intel 8080 processor. It can run CP/M.

Honeywell H316/H516

Emulates the work horse behind the ARPANET IMPs. In 2013 the emulator was modified to bring up the original IMP code and connect them together (tunnelled over IP). Demo instructions are available in the latest source. The IMP side of the 1822 is there, but there is not much of a host side yet. I don't see anything in simh that would be able to plug in anyway. An associated computer consultants (acc) 1822 card for the pdp-11 would be a start.

HP2100

I really don't know much about this machine, but I included a way to run the basic1 program I found online. It kind of reminds me of the ROMBASIC back 'in the day'... It's basic with line numbers so I know it's kind of old.. I really don't know much otherwise about this machine.

Interdata 8/32

The interdata 8/32 micro was the first non PDP-11 to run UNIX. SIMH can run both v6 & v7 research editions for the Interdata.

Nova

SIMH can run RDOS 7.5 for the Nova.

SIMH also includes Data General Eclipse support, but there is no available OS.

DEC PDP-1

The original PDP-1 is emulated although most of the software is expected to be toggled from the console, or loaded from paper tape. SIMH does not emulate the display needed for spacewar.

DEC PDP-8

The PDP-8 was the first 'affordable' microcomputer... OS/8 runs under SIMH.

DEC PDP-10

The PDP-10 model KS processor is emulated and will run all but the latest versions of the TOPS-10 and TOPS-20 operating systems.

DEC PDP-11

The PDP-11 is emulated enough to run most PDP-11 operating systems including the early Unixes (v1,4,5,6,7 are known to run).

MicroVAX II

SIMH can run the MicroVAX II with as much as 256mb of emulated ram. Both VMS, NetBSD, OpenBSD and original BSD can run on this emulator. Additionally, the network adapter functions correctly under this emulator, unlike the VAX-11/780.

VAX 11/780

SIMH can also emulate the first model of the VAX, the VAX-11/780. This is appropriate for older operating systems like VMS release 1.x and the original 32v, 3BSD and all 4BSD releases.

Usage

SIMH can either take in configuration parameters interactively, or you can store them in a file. If the file is the name of the emulator+.ini it will load them automatically (eg vax.exe loads vax.ini automatically). The CONTROL+E key will break the emulation and bring you back to the SIMH console where you can alter the running state.

Networking is covered in the Networking with SIMH guide.

Support

While not immediately obvious, there is a mailing list here http://mailman.trailing-edge.com/pipermail/simh/. I would recommend searching the thing, and you'll be amazed how much good information there is in there. Likewise, I'd recommend joining the list if you are interested in running SIMH. You can join here. As 4.0 is still in beta, the public source repository is also a great source of information.