Difference between revisions of "TS03 DECmagtape Transport"
(Start) |
m (Avoid redirs) |
||
| Line 11: | Line 11: | ||
It is able to store 5 Mbytes on a 600' 0.5" wide tape, on a standard 7" (i.e. small) reel. It supports 9-track operation at 800 BPI only, using [[NRZI]] [[encoding]]. The tape transport utilizes a single capstan, with dynamic servo control. | It is able to store 5 Mbytes on a 600' 0.5" wide tape, on a standard 7" (i.e. small) reel. It supports 9-track operation at 800 BPI only, using [[NRZI]] [[encoding]]. The tape transport utilizes a single capstan, with dynamic servo control. | ||
| − | To connect to [[UNIBUS]] [[PDP-11]] | + | To connect to [[UNIBUS]] machine such as a [[PDP-11]], one of the [[TM11 magtape controller|TM11 series]] of magtape [[device controller]]s is used; the TS03 shipped with a TMB11. (Details of the controller-drive interface are given [[TM11 magtape controller#Drive Connection|here]].) |
| − | A single controller could handle up to two TS03 | + | A single controller could handle up to two TS03 drives; the first TS03 drive is a 'Master', and contains an M8920 interface board to adapt the TM11 interface to the drive; the additional 'Slave' drive may be connected to the Master drive. |
| − | A TS03 drive can be mounted in a standard 10-1/2" mounting space in a standard DEC | + | A TS03 drive can be mounted in a standard 10-1/2" mounting space in a standard DEC rack such as an [[H960 rack]]. |
[[Category:Tape Drives]] | [[Category:Tape Drives]] | ||
Revision as of 01:36, 21 April 2018
| TS03 | |
| Tape speed: | 12-1/2 ips (Forward/Reverse) 120 ips (Rewind) |
|---|---|
| Size: | 19"W x 17"D x 10-1/2"H |
| Weight: | 34 lbs |
The TS03 is a low-cost, smallish, modest performance magnetic tape drive from DEC.
It is able to store 5 Mbytes on a 600' 0.5" wide tape, on a standard 7" (i.e. small) reel. It supports 9-track operation at 800 BPI only, using NRZI encoding. The tape transport utilizes a single capstan, with dynamic servo control.
To connect to UNIBUS machine such as a PDP-11, one of the TM11 series of magtape device controllers is used; the TS03 shipped with a TMB11. (Details of the controller-drive interface are given here.)
A single controller could handle up to two TS03 drives; the first TS03 drive is a 'Master', and contains an M8920 interface board to adapt the TM11 interface to the drive; the additional 'Slave' drive may be connected to the Master drive.
A TS03 drive can be mounted in a standard 10-1/2" mounting space in a standard DEC rack such as an H960 rack.
