Difference between revisions of "Talk:KL10"

From Computer History Wiki
Jump to: navigation, search
(Version confusion: Getting there)
m (Version confusion: fmt)
Line 43: Line 43:
 
:: Looking at the images in the ([http://corestore.org/DEC2065.htm Corestore page], I'm wondering if the difference between the KL10-A (no RH20s) and the KL10-B (same Model A CPU, RH20s) is just the wiring (i.e. no cable ports for MASSBUS)? Or maybe it's the MBox backplane? Either could explain the -A/-B difference that's so confusing me. [[User:Jnc|Jnc]] ([[User talk:Jnc|talk]]) 16:41, 8 July 2019 (CEST)
 
:: Looking at the images in the ([http://corestore.org/DEC2065.htm Corestore page], I'm wondering if the difference between the KL10-A (no RH20s) and the KL10-B (same Model A CPU, RH20s) is just the wiring (i.e. no cable ports for MASSBUS)? Or maybe it's the MBox backplane? Either could explain the -A/-B difference that's so confusing me. [[User:Jnc|Jnc]] ([[User talk:Jnc|talk]]) 16:41, 8 July 2019 (CEST)
 
:: Also, the [[http://www.shiresoft.com/pdp-11/kl-10/ Shiresoft KL10 page] has an image which shows all the connectors from the MBox, which allows one to tell (on the Corestore image which shows how they are wired) what functionality was where on the MBox backplane. Now if only we had an image of a KL10-A MBox backplane! [[User:Jnc|Jnc]] ([[User talk:Jnc|talk]]) 16:51, 8 July 2019 (CEST)
 
:: Also, the [[http://www.shiresoft.com/pdp-11/kl-10/ Shiresoft KL10 page] has an image which shows all the connectors from the MBox, which allows one to tell (on the Corestore image which shows how they are wired) what functionality was where on the MBox backplane. Now if only we had an image of a KL10-A MBox backplane! [[User:Jnc|Jnc]] ([[User talk:Jnc|talk]]) 16:51, 8 July 2019 (CEST)
 
  
 
Well, between Eric's help, and careful perusal of the docs, I think we're getting there. There are a few points still un-answered, but I'm not sure we'll get answers to those unless we can ask one of the KL10 engineers. [[User:Jnc|Jnc]] ([[User talk:Jnc|talk]]) 19:03, 11 July 2019 (CEST)
 
Well, between Eric's help, and careful perusal of the docs, I think we're getting there. There are a few points still un-answered, but I'm not sure we'll get answers to those unless we can ask one of the KL10 engineers. [[User:Jnc|Jnc]] ([[User talk:Jnc|talk]]) 19:03, 11 July 2019 (CEST)

Revision as of 18:03, 11 July 2019

MC at LCM

I thought MC went to Sweden; how did it end up at the LCM? Jnc (talk) 16:23, 24 June 2019 (CEST)

That's right, it did. It remained for many years in Peter Löthberg's storage. But last year most of the computers there, including MC, was moved to LCM. Larsbrinkhoff (talk) 19:47, 24 June 2019 (CEST)
Figured; didn't his KI10 wind up there too? Jnc (talk) 21:29, 24 June 2019 (CEST)
Yes, parts of the dual and sometimes triple processor "KICKI". And also KATIA (literally "KA-10" in Swedish), a CADR, and some other goodies. Well worth a visit if you're in town; ask for the basement tour. Larsbrinkhoff (talk) 07:01, 25 June 2019 (CEST)

Microword

Someone who looked at the schematics claims the microword width was 75 bits on the model A, and 76 on the model B. The additional bit is used to implement an improved CALL instruction. Larsbrinkhoff (talk) 07:29, 6 July 2019 (CEST)

Yeah, I vaguely recall something like that.
I really wish there was a single document one could consult which covered all the variants, and gave the differences, but no, it seems like one has to read through everything that's left to find it all. And then there are things like the S-Bus/X-Bus switch; it would be nice to have something which says what the differences are (surely such a doc would have been useful BITD; for people who already know the S-Bus, read that, and you're done), but it looks like we're going to have to read the descriptions of both, and work out what changed. Sigh. Jnc (talk) 15:54, 6 July 2019 (CEST)

Version confusion

So EK-0KL20-IN-001 ("KL10-Based DECSystem-20 Installation Manual") gives, in Section 10.2 "KL10-PV Upgrade Procedure for KL10-C" instructions which clearly include the replacement of the main CPU backplane. However other documents make it sound like the Model B supports multiple sections. So now I'm completely confused as to the whole multi-section thing; I thought it came in with the Model E (AKA KA10-PV), and needed a different CPU backplane, but maybe not? Is the KL10-E different physically from the Model B, or not? Jnc (talk) 01:05, 7 July 2019 (CEST)

E.g. in AD-H391A-T1 ("DECSystem-10/DECSystem-20 Processor Reference Manual"), it says (pg. 1-2) "The {KL10} exists in two versions, with and without extended addressing". So maybe the Model B supports sections? So is a 'KL10-C' a Model A processor? If not, why does the KL10-PV upgrade need to replace the CPU? Very confusing. Jnc (talk) 01:20, 7 July 2019 (CEST)

As further data, the "1080, 2040, 2060 Engineering Functional Spec" discusses sections, so it sounds like the Model B supported sections from the start? Or perhaps the hardware had the necessary support, but it needed upgraded microcode which was not available at the initial Model B release. (It's not clear if that document refers to the Model A or not; given the discussion in there of the RH20, not present on the Model A, probably not. Then again, since the 1080 apparently used a Model A - the model numbers are confusing too - who knows?) FWIW, the ucode version history shows that section support was added starting in rev 201 ("BEGIN EXTENDED ADDRESSING CHANGES IN EARNEST"). Jnc (talk) 01:57, 7 July 2019 (CEST)

I also think it's confusing, but the way I have seen people talk about this, my theory is these are one set of models: KL10-PA, KL10-PV, and KL10-PW. I believe the first is the non-extended, and the second to have extended addressing. The last one has a bigger cache.
Then there is another set of models: KL10-A, KL10-B, KL10-C, KL10-D, KL10-E, KL10-R. A/B/C had KL10-PA, the others PV or PW.
Finally "model A" and "model B" is yet another thing. Model A is the KL10-PA without extended addressing, with a "model A backplane", and just 1280 words of microcode store. Model B had extended addressing, another backplane, and 2048 words. Larsbrinkhoff (talk) 10:23, 7 July 2019 (CEST)
Yeah, clearly there are multiple 'namespaces' involved, and my thinking has been on roughly the same lines (with the three you mention). Some differences in the details, though...
E.g. in EK-0KL10-02 Part 1 (no title, seems to be notes for F/S) pg. 9, it says a 1090 can be a "KL10-B(PA) or KL10-D(PV)", and in the next table down, it says a KL10-B is PV=no, but has RH20's. So now I'm really confused, since I thought the RH20's needed the modified backplane of the model B.
Speaking of which, a note at the bottom of the page says that a PA is a 'Model A', and describes it as having "internal channels". The PV is a 'Model B' (extended addressing, larger ucode, faster clock). So maybe the Model A backplane can support RH20's, but something (e.g. CPU board set) doesn't allow that in the KL10-A (the table shows the KL10-A with "No" for "Int Chan" - C Bus and RH20s, I assume).
The tables show the KL10-A, -B and -C as "PA", with the -D and -E as "PV". (Any idea what 'PV' stands for?) I think I may just include that table to show what the -A through -E mean.
As to the cache, EK-OKL10-TM ("KL10-Based Technical Manual") has an Appendix A "MCA25 KL Cache/Paging Upgrade", which focusses on what it does, but it sounds like that cache was an upgrade to the PV. So I'm not sure the PW is fundamentally different, although maybe it is a DEC product code for a Model B with MCA25 pre-installed. Jnc (talk) 19:13, 7 July 2019 (CEST)
For additional hilarity, in this page I found::
"Model-C backplane" with 4096 words cache and double pager buffer (1024 instead of 512). Existing 1091 and 2060 systems could be upgraded to 1095 and 2065 by installing the "Model-C" modifications.
although I'm a bit dubious about the new backplane part; the specs seem to be those of the MCA25 (above), from which it's clear that there had to have been new boards, at least, though.
(This page says "The designation is KL10-RH, which confirms it had the final MCA25 cache/pager upgrade.")
That first page also says "KL10-R = same as KL10-E, but in FCC approved cabinets", but then goes on to say "The KL10-R has a 'Model-C backplane' with 4096 words cache and double pager buffer (1024 instead of 512)", which agrees with the above.
Since these are all personal sites, I'm reluctant to rely too much on them, though. Wish we could find more on the MCA25 hardware... Jnc (talk) 15:20, 8 July 2019 (CEST)
Looking at the images in the (Corestore page, I'm wondering if the difference between the KL10-A (no RH20s) and the KL10-B (same Model A CPU, RH20s) is just the wiring (i.e. no cable ports for MASSBUS)? Or maybe it's the MBox backplane? Either could explain the -A/-B difference that's so confusing me. Jnc (talk) 16:41, 8 July 2019 (CEST)
Also, the [Shiresoft KL10 page has an image which shows all the connectors from the MBox, which allows one to tell (on the Corestore image which shows how they are wired) what functionality was where on the MBox backplane. Now if only we had an image of a KL10-A MBox backplane! Jnc (talk) 16:51, 8 July 2019 (CEST)

Well, between Eric's help, and careful perusal of the docs, I think we're getting there. There are a few points still un-answered, but I'm not sure we'll get answers to those unless we can ask one of the KL10 engineers. Jnc (talk) 19:03, 11 July 2019 (CEST)