DF11 Communications Line Adapter

From Computer History Wiki
Jump to: navigation, search

The DF11 Communications Line Adapter performs two functions for serial line communication interfaces on PDP-11 computers: i) converts from TTL signal levels to the voltages, etc needed by a given serial line standard, and ii) produces the physical connector needed for that standard.

A DF11 usually involves two single-width cards, one holding the circuitry needed, and the other providing, sometimes with a cable plugged into a Berg connector, the interface connector. At least one dual-width adapter (the DF11-B) existed, though.

The DF11 plugs into a common backplane with the serial interface. DF11's are used with DC11, DP11, DH11, and DL11 UNIBUS serial interfaces (the latter only in DD11-B backplanes). They may also be used in some versions of the PDP-11/05 or PDP-11/10.

DF11 models include:

  • DF11-A - EIA RS-232 adapter
  • DF11-B - integral modem for connection to a telephone line
  • DF11-F - 20m current loop adapter (up to 300 baud)
  • DF11-G - custom interface to a Bell 301/303 modem
  • DF11-K - 4-wire opto-isolated 20mA adapter (up to 2400 baud)