Jnc: Synchronous-only; speed, and another connector

2023-05-14T14:48:44Z

Synchronous-only; speed, and another connector

← Older revision		Revision as of 14:48, 14 May 2023
Line 1:		Line 1:
	The '''ITU V.35 serial line interface''' standard (usually known simply as '''V.35''') is a [[serial line]] interface~~; it~~ is a [[differential pair\|differential]] system compatible at the [[analog]] level with the [[EIA RS-422 serial line interface]], but using a different [[connector]] (the 37-pin ISO 4902 ~~connector~~).		The '''ITU V.35 serial line interface''' standard (usually known simply as '''V.35''') is a [[synchronous serial line]] interface. It is a [[differential pair\|differential]] system, compatible at the [[analog]] level with the [[EIA RS-422 serial line interface]], but using different [[connector]]s (the 37-pin ISO 4902 and 15-pin ISO 4903 connectors). The maximum speed is 2 Mbit/s. It was later re-numbered as 'ITU-T recommendation V.11'.

	The use of differentials allows high speeds over longer distances; it also avoids issues with requiring a common [[ground]].		The use of differentials allows high speeds over longer distances; it also avoids issues with requiring a common [[ground]].

Jnc: East to cover this one too

2023-05-14T14:37:15Z

East to cover this one too

New page

The '''ITU V.35 serial line interface''' standard (usually known simply as '''V.35''') is a [[serial line]] interface; it is a [[differential pair|differential]] system compatible at the [[analog]] level with the [[EIA RS-422 serial line interface]], but using a different [[connector]] (the 37-pin ISO 4902 connector).

The use of differentials allows high speeds over longer distances; it also avoids issues with requiring a common [[ground]].

{{semi-stub}}

[[Category: Serial Lines]]

ITU V.35 serial line interface - Revision history

Jnc: Synchronous-only; speed, and another connector

Jnc: East to cover this one too