PDP-11/60 - Revision history

Jnc: memory, boxes

2022-01-11T14:34:19Z

memory, boxes

← Older revision		Revision as of 14:34, 11 January 2022
Line 12:		Line 12:

	A single slot in the [[Central Processing Unit\|CPU]]'s [[backplane]] is available to hold either a User Control Store (1KW of read-write microcode), an Extended Control Store (1.5KW [[Read-only memory\|ROM]] microcode), or a Diagnostic Control Store.		A single slot in the [[Central Processing Unit\|CPU]]'s [[backplane]] is available to hold either a User Control Store (1KW of read-write microcode), an Extended Control Store (1.5KW [[Read-only memory\|ROM]] microcode), or a Diagnostic Control Store.

			Standard [[main memory]] was either [[MM11-W core memory\|MM11-WP]] [[core memory]], or [[MF11S-KF MOS Memory]].

			The -11/60 used swing-out [[BA11-P card cage]]s to hold all its [[printed circuit board\|cards]]; generally a pair, one holding the [[Central Processing Unit\|CPU]] and [[device controller]]s, the other main memory and more controllers.

	==hampage.hu==		==hampage.hu==

Jnc: /* External links */ +FMPS, manuals

2022-01-11T12:44:49Z

External links: +FMPS, manuals

← Older revision		Revision as of 12:44, 11 January 2022
Line 11:		Line 11:
	The PDP-11/60 is based around the [[KD11-K CPU]]. It provided the full [[FP11 floating point]] using microcode; as an option, the [[FP11-E Floating Point Processor]], which provided a high-performance implementation as a [[co-processor]], was also available.		The PDP-11/60 is based around the [[KD11-K CPU]]. It provided the full [[FP11 floating point]] using microcode; as an option, the [[FP11-E Floating Point Processor]], which provided a high-performance implementation as a [[co-processor]], was also available.

	A single slot in the [[Central Processing Unit\|CPU]]'s [[backplane]] is available to hold either a User Control Store		A single slot in the [[Central Processing Unit\|CPU]]'s [[backplane]] is available to hold either a User Control Store (1KW of read-write microcode), an Extended Control Store (1.5KW [[Read-only memory\|ROM]] microcode), or a Diagnostic Control Store.
	(1KW of read-write microcode), an Extended Control Store (1.5KW [[Read-only memory\|ROM]] microcode), or a Diagnostic Control Store.

	==hampage.hu==		==hampage.hu==
Line 25:		Line 24:

	{{semi-stub}}		{{semi-stub}}

			==External links==

			* [http://www.bitsavers.org/pdf/dec/pdp11/1160/ PDP-11/60] - BitSavers
			** [http://www.bitsavers.org/pdf/dec/pdp11/1160/EK-11060-OP-003_PDP-1160_installation_and_operation_manual_Feb78.pdf PDP-11/60 installation and operation manual] (EK-11060-OP-003)
			** [http://www.bitsavers.org/pdf/dec/pdp11/1160/EK-11060-SV-01_1160cab_Feb78.pdf PDP-11/60 cabinet and power supply manual] (EK-11060-SV-01)
			** [http://www.bitsavers.org/pdf/dec/pdp11/1160/MP00166_1160_System.pdf 11/60 Systems Field Maintenance Print Set] (MP00166)

	{{PDP-11}}		{{PDP-11}}

	[[Category: UNIBUS PDP-11s]]		[[Category: UNIBUS PDP-11s]]

Jnc: typo

2019-03-01T21:00:11Z

typo

← Older revision		Revision as of 21:00, 1 March 2019
Line 9:		Line 9:
	==Hardware==		==Hardware==

	The PDP-11/60 is based around the [[KD11-K CPU]]. It provided the full [[FP11 floating point]] using microcode; as an option, the [[FP11-E Floating Point ~~Proceesor~~]], which provided a high-performance implementation as a [[co-processor]], was also available.		The PDP-11/60 is based around the [[KD11-K CPU]]. It provided the full [[FP11 floating point]] using microcode; as an option, the [[FP11-E Floating Point Processor]], which provided a high-performance implementation as a [[co-processor]], was also available.

	A single slot in the [[Central Processing Unit\|CPU]]'s [[backplane]] is available to hold either a User Control Store		A single slot in the [[Central Processing Unit\|CPU]]'s [[backplane]] is available to hold either a User Control Store

Jnc: Add hardware info

2019-03-01T20:53:42Z

Add hardware info

← Older revision		Revision as of 20:53, 1 March 2019
Line 6:		Line 6:

	It is of interest now since it had an option to permit loadable [[microcode]]; it is a very rare machine, though, since its lack of commercial success meant very few were produced.		It is of interest now since it had an option to permit loadable [[microcode]]; it is a very rare machine, though, since its lack of commercial success meant very few were produced.

			==Hardware==

			The PDP-11/60 is based around the [[KD11-K CPU]]. It provided the full [[FP11 floating point]] using microcode; as an option, the [[FP11-E Floating Point Proceesor]], which provided a high-performance implementation as a [[co-processor]], was also available.

			A single slot in the [[Central Processing Unit\|CPU]]'s [[backplane]] is available to hold either a User Control Store
			(1KW of read-write microcode), an Extended Control Store (1.5KW [[Read-only memory\|ROM]] microcode), or a Diagnostic Control Store.

	==hampage.hu==		==hampage.hu==

Jnc: corredt loadable ucode option

2019-02-28T17:19:43Z

corredt loadable ucode option

← Older revision		Revision as of 17:19, 28 February 2019
Line 3:		Line 3:
	The '''PDP-11/60''' was, in its day, a rather unsuccessful model of [[Digital Equipment Corporation\|DEC]]'s [[PDP-11]] line; although considerable more complex than the [[PDP-11/34]], it did not have significant capability advantages over it.		The '''PDP-11/60''' was, in its day, a rather unsuccessful model of [[Digital Equipment Corporation\|DEC]]'s [[PDP-11]] line; although considerable more complex than the [[PDP-11/34]], it did not have significant capability advantages over it.

	It had the same [[PDP-11 Memory Management\|limited memory management]], without so-called 'I+D separatation', which therefore limited the size of the [[application]]s which could run on it; it also supported only the [[UNIBUS]], which normally limited it to 248KB of [[main memory]].		In particular, it had the same [[PDP-11 Memory Management\|limited memory management]], without so-called 'I+D separatation', which therefore limited the size of the [[application]]s which could run on it; it also supported only the [[UNIBUS]], which normally limited it to 248KB of [[main memory]].

	It is of interest now since it had loadable [[microcode]] ~~as a standard~~; it is a very rare machine, though, since its lack of commercial success meant very few were produced.		It is of interest now since it had an option to permit loadable [[microcode]]; it is a very rare machine, though, since its lack of commercial success meant very few were produced.

	==hampage.hu==		==hampage.hu==

Jnc: Add text, image

2019-02-24T02:20:59Z

Add text, image

← Older revision		Revision as of 02:20, 24 February 2019
Line 1:		Line 1:
	[[Image:pdp11_60.jpg\|thumb\|~~200px~~\|right\|PDP-11/60]]		[[Image:pdp11_60.jpg\|thumb\|250px\|left\|PDP-11/60]]

			The '''PDP-11/60''' was, in its day, a rather unsuccessful model of [[Digital Equipment Corporation\|DEC]]'s [[PDP-11]] line; although considerable more complex than the [[PDP-11/34]], it did not have significant capability advantages over it.

			It had the same [[PDP-11 Memory Management\|limited memory management]], without so-called 'I+D separatation', which therefore limited the size of the [[application]]s which could run on it; it also supported only the [[UNIBUS]], which normally limited it to 248KB of [[main memory]].

			It is of interest now since it had loadable [[microcode]] as a standard; it is a very rare machine, though, since its lack of commercial success meant very few were produced.

			==hampage.hu==

			[[Image:PDP-1160FrontConsole.jpg\|thumb\|150px\|right\|Front console of a PDP-11/60]]

	~~== hampage.hu ==~~
	Quote:<p>		Quote:<p>
	<i>		<i>
Line 8:		Line 17:
	As for packaging, it came in the "low boy/high boy" cabinets, the one pictured to the left is the "high" one. The storage devices could be placed in the upper region, the card cage itself was in the lower half.</i>		As for packaging, it came in the "low boy/high boy" cabinets, the one pictured to the left is the "high" one. The storage devices could be placed in the upper region, the card cage itself was in the lower half.</i>

	{{stub}}		{{semi-stub}}

	{{PDP-11}}		{{PDP-11}}

	[[Category: UNIBUS PDP-11s]]		[[Category: UNIBUS PDP-11s]]

Jnc: Proper cat

2018-02-17T14:49:50Z

Proper cat

@@ Line 1: / Line 1: @@
 [[Image:pdp11_60.jpg|thumb|200px|right|PDP-11/60]]
 == hampage.hu ==
@@ Line 11: / Line 7: @@
 As for packaging, it came in the "low boy/high boy" cabinets, the one pictured to the left is the "high" one. The storage devices could be placed in the upper region, the card cage itself was in the lower half.</i>

Neozeed at 16:37, 19 May 2011

2011-05-19T16:37:15Z

@@ Line 1: / Line 1: @@
 [[Image:pdp11_60.jpg|thumb|200px|right|PDP-11/60]]
 {{PDP-11}}
 [[Category:UNIBUS processors]]

Neozeed at 21:32, 3 August 2010

2010-08-03T21:32:23Z

← Older revision		Revision as of 21:32, 3 August 2010
Line 1:		Line 1:
			I know nothing about this PDP-11.


			[[Image:pdp11_60.jpg\|thumb\|200px\|right\|PDP-11/60]]

			{{PDP-11}}
	[[Category:UNIBUS processors]]		[[Category:UNIBUS processors]]

Lucky at 21:49, 16 May 2007

2007-05-16T21:49:17Z

← Older revision		Revision as of 21:49, 16 May 2007
Line 1:		Line 1:
	[[Category:UNIBUS ~~Processors~~]]		[[Category:UNIBUS processors]]