Difference between revisions of "Backplane"
From Computer History Wiki
(stubby, but fills a need) |
m (mention wire-wrap) |
||
| Line 1: | Line 1: | ||
| − | A '''backplane''' is a construct used to connect various components - usually each a single [[PCB]] - of a computer. The backplane contains a number of connectors, mechanically connected to each other, and then wired together; the components are plugged into the connectors. In early backplanes, the connections were hand- or machine-wired: later, PCBs were often used. | + | A '''backplane''' is a construct used to connect various components - usually each a single [[PCB]] - of a computer. The backplane contains a number of connectors, mechanically connected to each other, and then wired together; the components are plugged into the connectors. In early backplanes, the connections were hand- or machine-wired (often using [[wire-wrap]]): later, PCBs were often used. |
The connectors often utilize contacts ('lands') on the edge of a PCB; when the edge is plugged into the connector, contacts in the connector touch the lands and complete the circuit. | The connectors often utilize contacts ('lands') on the edge of a PCB; when the edge is plugged into the connector, contacts in the connector touch the lands and complete the circuit. | ||
Revision as of 00:59, 9 June 2017
A backplane is a construct used to connect various components - usually each a single PCB - of a computer. The backplane contains a number of connectors, mechanically connected to each other, and then wired together; the components are plugged into the connectors. In early backplanes, the connections were hand- or machine-wired (often using wire-wrap): later, PCBs were often used.
The connectors often utilize contacts ('lands') on the edge of a PCB; when the edge is plugged into the connector, contacts in the connector touch the lands and complete the circuit.
In early computers, the components were small, and were only small sub-units (i.e. not a complete CPU or main memory unit); later, such entities were built on a single PCB.
