Difference between revisions of "DD11-C backplane"
From Computer History Wiki
(An OK start) |
(+DD11-CP) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
The '''DD11-C backplane''' is a 4-slot [[Modified UNIBUS Device|MUD]] [[backplane]] [[system unit]]. It was normally installed in a [[BA11 mounting boxes|BA11 mounting box]]. | The '''DD11-C backplane''' is a 4-slot [[Modified UNIBUS Device|MUD]] [[backplane]] [[system unit]]. It was normally installed in a [[BA11 mounting boxes|BA11 mounting box]]. | ||
| − | There are two versions, the | + | There are two versions, the '''DD11-CF''' and '''DD11-CK''', intended for use in the [[BA11-F Mounting Box]] and [[BA11-K mounting box]], respectively; they differ basically only in the length of the [[power harness]], although the two provide +5VB (battery backup) on different [[pin]]s of the [[DEC power distribution connectors]]. A DD11-CP existed as well, for use in the [[BA11-P card cage]]. |
| + | |||
| + | [[Category: DEC Hardware]] | ||
Revision as of 13:47, 14 January 2022
The DD11-C backplane is a 4-slot MUD backplane system unit. It was normally installed in a BA11 mounting box.
There are two versions, the DD11-CF and DD11-CK, intended for use in the BA11-F Mounting Box and BA11-K mounting box, respectively; they differ basically only in the length of the power harness, although the two provide +5VB (battery backup) on different pins of the DEC power distribution connectors. A DD11-CP existed as well, for use in the BA11-P card cage.
