Difference between revisions of "DF11 Communications Line Adapter"
(The basics) |
(add EIA card for modem conn) |
||
(5 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | The '''DF11 Communications Line Adapter''' performs two functions for [[serial line]] communication | + | The '''DF11 Communications Line Adapter''' performs two functions for [[serial line]] communication interfaces on [[PDP-11]] computers: i) converts from [[transistor-transistor logic|TTL]] signal levels to the [[voltage]]s, etc needed by a given serial line standard, and ii) produces the physical connector needed for that standard. |
− | A DF11 usually involves two [[DEC card form factor|single-width]] cards, one holding the circuitry needed, and the other providing, sometimes with a cable plugged into a [[Berg connector]], the interface connector. At least one dual-width adapter existed, though. | + | A DF11 usually involves two [[DEC card form factor|single-width]] cards, one holding the circuitry needed, and the other providing, sometimes with a cable plugged into a [[Berg connector]], the interface connector. At least one dual-width adapter (the DF11-B) existed, though. |
− | DF11's are used with [[ | + | The DF11 plugs into a common [[backplane]] with the serial interface. DF11's are used with [[DP11-A synchronous serial line interface|DP11]], [[DM11 asynchronous serial line interface|DM11]], [[DH11 asynchronous serial line interface|DH11]], [[DC11 asynchronous serial line interface|DC11]], and [[DL11 asynchronous serial line interface|DL11]] [[UNIBUS]] serial interfaces (the latter only in [[DD11-B backplane]]s). They may also be used in some versions of the [[PDP-11/05]] or [[PDP-11/10]]. |
DF11 models include: | DF11 models include: | ||
− | * DF11-A - [[EIA RS-232 serial line interface|EIA RS-232]] adapter | + | * DF11-A (M594, M957-BC01R, M970-BC01R for modem cable) - [[EIA RS-232 serial line interface|EIA RS-232]] adapter |
− | * DF11- | + | * DF11-BA (M586) - integral [[modem]] for connection to a telephone line |
− | * DF11-F - [[20mA current loop serial line interface| | + | * DF11-BB (M587) - integral answer-only modem |
− | * DF11-G - custom interface to a Bell 301/303 modem | + | * DF11-F (M596, M973) - [[20mA current loop serial line interface|20m current loop]] adapter (up to 300 [[baud rate|baud]]) |
− | * DF11-K - 4-wire 20mA adapter | + | * DF11-G (M595, BC01T-BC01Y) - custom interface to a Bell 301/303 modem |
+ | * DF11-K (M598, M973) - 4-wire opto-isolated 20mA adapter (up to 2400 baud) | ||
{{semi-stub}} | {{semi-stub}} | ||
[[Category: UNIBUS Serial Interfaces]] | [[Category: UNIBUS Serial Interfaces]] |
Revision as of 02:52, 2 October 2019
The DF11 Communications Line Adapter performs two functions for serial line communication interfaces on PDP-11 computers: i) converts from TTL signal levels to the voltages, etc needed by a given serial line standard, and ii) produces the physical connector needed for that standard.
A DF11 usually involves two single-width cards, one holding the circuitry needed, and the other providing, sometimes with a cable plugged into a Berg connector, the interface connector. At least one dual-width adapter (the DF11-B) existed, though.
The DF11 plugs into a common backplane with the serial interface. DF11's are used with DP11, DM11, DH11, DC11, and DL11 UNIBUS serial interfaces (the latter only in DD11-B backplanes). They may also be used in some versions of the PDP-11/05 or PDP-11/10.
DF11 models include:
- DF11-A (M594, M957-BC01R, M970-BC01R for modem cable) - EIA RS-232 adapter
- DF11-BA (M586) - integral modem for connection to a telephone line
- DF11-BB (M587) - integral answer-only modem
- DF11-F (M596, M973) - 20m current loop adapter (up to 300 baud)
- DF11-G (M595, BC01T-BC01Y) - custom interface to a Bell 301/303 modem
- DF11-K (M598, M973) - 4-wire opto-isolated 20mA adapter (up to 2400 baud)