Difference between revisions of "DF11 Communications Line Adapter"

From Computer History Wiki
Jump to: navigation, search
(Confirm M596)
(add EIA card for modem conn)
Line 7: Line 7:
 
DF11 models include:
 
DF11 models include:
  
* DF11-A (M594, M957-BC01R) - [[EIA RS-232 serial line interface|EIA RS-232]] adapter
+
* DF11-A (M594, M957-BC01R, M970-BC01R for modem cable) - [[EIA RS-232 serial line interface|EIA RS-232]] adapter
 
* DF11-BA (M586) - integral [[modem]] for connection to a telephone line
 
* DF11-BA (M586) - integral [[modem]] for connection to a telephone line
 
* DF11-BB (M587) - integral answer-only modem
 
* DF11-BB (M587) - integral answer-only modem

Revision as of 01:52, 2 October 2019

The DF11 Communications Line Adapter performs two functions for serial line communication interfaces on PDP-11 computers: i) converts from TTL signal levels to the voltages, etc needed by a given serial line standard, and ii) produces the physical connector needed for that standard.

A DF11 usually involves two single-width cards, one holding the circuitry needed, and the other providing, sometimes with a cable plugged into a Berg connector, the interface connector. At least one dual-width adapter (the DF11-B) existed, though.

The DF11 plugs into a common backplane with the serial interface. DF11's are used with DP11, DM11, DH11, DC11, and DL11 UNIBUS serial interfaces (the latter only in DD11-B backplanes). They may also be used in some versions of the PDP-11/05 or PDP-11/10.

DF11 models include:

  • DF11-A (M594, M957-BC01R, M970-BC01R for modem cable) - EIA RS-232 adapter
  • DF11-BA (M586) - integral modem for connection to a telephone line
  • DF11-BB (M587) - integral answer-only modem
  • DF11-F (M596, M973) - 20m current loop adapter (up to 300 baud)
  • DF11-G (M595, BC01T-BC01Y) - custom interface to a Bell 301/303 modem
  • DF11-K (M598, M973) - 4-wire opto-isolated 20mA adapter (up to 2400 baud)