Difference between revisions of "DMA20 Memory Bus Adapter"

From Computer History Wiki
Jump to: navigation, search
m (External links: +Eng drw)
m (Avoid use of internal page tag)
Line 1: Line 1:
The '''DMA20 Memory Bus Adapter''' is an optional [[device controller|controller]] on [[KL10]] [[Central Processing Unit|CPUs]] which converts from the KL10's native SBus [[main memory]] [[bus]] to an old-style [[PDP-10#Busses|PDP-10 memory bus]] (termed an 'KBus' here), to allow existing [[PDP-10]] [[core memory|core]] main memory to be used on one. (In a [[multi-processor]] system, each CPU has a separate DMA20, if configured to have one; the [[multi-port memory]] banks of [[PDP-10 memories]] will allow banks to be shared between CPUs.)
+
The '''DMA20 Memory Bus Adapter''' is an optional [[device controller|controller]] on [[KL10]] [[Central Processing Unit|CPUs]] which converts from the KL10's native SBus [[main memory]] [[bus]] to an old-style [[PDP-10 Memory Bus]] (termed an 'KBus' here), to allow existing [[PDP-10]] [[core memory|core]] main memory to be used on one. (In a [[multi-processor]] system, each CPU has a separate DMA20, if configured to have one; the [[multi-port memory]] banks of [[PDP-10 memories]] will allow banks to be shared between CPUs.)
  
 
==Implementation==
 
==Implementation==

Revision as of 22:11, 27 September 2022

The DMA20 Memory Bus Adapter is an optional controller on KL10 CPUs which converts from the KL10's native SBus main memory bus to an old-style PDP-10 Memory Bus (termed an 'KBus' here), to allow existing PDP-10 core main memory to be used on one. (In a multi-processor system, each CPU has a separate DMA20, if configured to have one; the multi-port memory banks of PDP-10 memories will allow banks to be shared between CPUs.)

Implementation

Memory bus Quick Latch connector (in latched position)

The DMA20 is connected to the MBox of the KL10 via the SBus. Four separate KBuses are provided per CPU, to allow maximum (for the KL10) interleaving; the DMA20 can operate in 1-, 2- or 4-bus mode.

It consists of ten hex boards (an M8560, M8563, and eight M8558 modules) plugged into an I/O backplane (one shared with the DIA20 IBus Adapter‎) of the KL10; these are connected to memory bus connectors mounted lower down in that rack.

External links