Difference between revisions of "DR11-B parallel interface"
(→Implementation: Add boards locs) |
(→Implementation: power, tweaks) |
||
| Line 3: | Line 3: | ||
==Implementation== | ==Implementation== | ||
| − | It was constructed from a number of smaller [[Flip Chip]]s which were installed in custom 4-slot [[ | + | It was constructed from a number of smaller [[Flip Chip]]s which were installed in custom 4-slot [[backplane]] [[system unit]]. The extant DR11-B documentation does not show either the modules used in the DR11-B, or their locations in the backplane, so that information is given here. |
The modules are: | The modules are: | ||
| Line 18: | Line 18: | ||
* M7219 - Bus Interface | * M7219 - Bus Interface | ||
| − | + | The M7219 is a [[DEC card form factor|quad]] card; the others are all single. (Of those, the M796 and M7821 are [[DEC card form factor|extended length]]; the others are all standard length.) The M239 is used to hold the Command and Status Register. | |
| − | |||
| − | The M7219 is a [[DEC card form factor|quad]] card; the others are all single. ( | ||
Board locations (as seen from the board insertion side of the backplane, not the [[wire-wrap]] pin side, as it common in [[DEC]] documentation) are: | Board locations (as seen from the board insertion side of the backplane, not the [[wire-wrap]] pin side, as it common in [[DEC]] documentation) are: | ||
| Line 29: | Line 27: | ||
! Slot !! A !! B !! C !! D !! E !! F | ! Slot !! A !! B !! C !! D !! E !! F | ||
|- | |- | ||
| − | | 1 || colspan="2" style="text-align:center;" | UNIBUS In || colspan="4" style="text-align:center;" | M7219 | + | | 1 || colspan="2" style="text-align:center;" | UNIBUS In || colspan="4" style="text-align:center;" | M7219 |
|- | |- | ||
| 2 || colspan="2" style="text-align:center;" | Test board || M208 || M208 || M7821 || M796 | | 2 || colspan="2" style="text-align:center;" | Test board || M208 || M208 || M7821 || M796 | ||
|- | |- | ||
| − | | 3 || Power | + | | 3 || Power || M205 || M611 || M611 || M112 || M113 |
|- | |- | ||
| 4 || colspan="2" style="text-align:center;" | UNIBUS Out || colspan="2" | User connector || M116 || M239 | | 4 || colspan="2" style="text-align:center;" | UNIBUS Out || colspan="2" | User connector || M116 || M239 | ||
|} | |} | ||
| − | Connection to the user device is via either a pair of M957 Split-Lug Cable boards, or via an M9760 (dual) Twisted Pair Cable Connector board. The M9680 (dual) board is a loopback test board, which can be | + | Connection to the user device is via either a pair of M957 Split-Lug Cable boards, or via an M9760 (dual) Twisted Pair Cable Connector board. The M9680 (dual) board is a loopback test board, which can be inserted in place of the user connection board(s). |
| + | |||
| + | Power comes in on a single-width card in the A3 slot (as is canonical in the [[PDP-11/20]] generation of PDP-11). | ||
| + | |||
| + | {{PDP-11}} | ||
| + | |||
| + | [[Category:UNIBUS Peripherals]] | ||
Revision as of 21:39, 4 June 2017
The DR11-B was a parallel interface for the UNIBUS which used DMA to transfer data.
Implementation
It was constructed from a number of smaller Flip Chips which were installed in custom 4-slot backplane system unit. The extant DR11-B documentation does not show either the modules used in the DR11-B, or their locations in the backplane, so that information is given here.
The modules are:
- M112 - 10 x 2-input NOR gates
- M113 - 10 x 2-input NAND gates
- M116 - 6 x 4-input NOR gates
- M205 - 5 x 'D' flip flops
- 2 x M208 - 8-bit buffer / shift-register
- M239 - 3 x 4-bit counter/register
- 2 x M611 - High speed power inverters
- M796 - UNIBUS Master Control
- M7821 - Interrupt Control
- M7219 - Bus Interface
The M7219 is a quad card; the others are all single. (Of those, the M796 and M7821 are extended length; the others are all standard length.) The M239 is used to hold the Command and Status Register.
Board locations (as seen from the board insertion side of the backplane, not the wire-wrap pin side, as it common in DEC documentation) are:
| Connector | ||||||
|---|---|---|---|---|---|---|
| Slot | A | B | C | D | E | F |
| 1 | UNIBUS In | M7219 | ||||
| 2 | Test board | M208 | M208 | M7821 | M796 | |
| 3 | Power | M205 | M611 | M611 | M112 | M113 |
| 4 | UNIBUS Out | User connector | M116 | M239 | ||
Connection to the user device is via either a pair of M957 Split-Lug Cable boards, or via an M9760 (dual) Twisted Pair Cable Connector board. The M9680 (dual) board is a loopback test board, which can be inserted in place of the user connection board(s).
Power comes in on a single-width card in the A3 slot (as is canonical in the PDP-11/20 generation of PDP-11).
| v • d • e PDP-11 Computers and Peripherals |
|---|
| UNIBUS PDP-11s - PDP-11/20 • PDP-11/15 • PDP-11/35 • PDP-11/40 • PDP-11/45 • PDP-11/50 • PDP-11/55 • PDP-11/70 PDP-11/05 • PDP-11/10 • PDP-11/04 • PDP-11/34 • PDP-11/60 • PDP-11/44 • PDP-11/24 • PDP-11/84 • PDP-11/94 QBUS PDP-11s - PDP-11/03 • PDP-11/23 • PDP-11/23+ • MicroPDP-11/73 • MicroPDP-11/53 • MicroPDP-11/83 • MicroPDP-11/93 QBUS CPUs: LSI-11 • LSI-11/2 • KDF11-A • KDF11-B • KDJ11-A • KDJ11-B • KDJ11-D • KDJ11-E Buses: UNIBUS • UNIBUS map • SPC • MUD • EUB • QBUS • CD interconnect • PMI Also: PDP-11 architecture • PDP-11 Extended Instruction Set • FP11 floating point • PDP-11 Memory Management |
| UNIBUS CPUs: KA11 • KC11 • KB11-A • KB11-B • KB11-C • KB11-D • KD11-A • KD11-B • KD11-D • KD11-E • KD11-EA • KD11-K • KD11-Z • KDF11-U
Co-processors: FP11-A • FP11-B • FP11-C • FP11-E • FP11-F • KE44-A • FPF11 Chips: LSI-11 • KEV11-A • KEV11-B • KEV11-C • F-11 • KEF11-A • KTF11-A • T-11 • J-11 • FPJ11 CPU options: KE11-E • KE11-F • KJ11-A • KT11-C • KT11-D • KK11-A • KK11-B • KT24 • KTJ11-B Rare CPU options: KS11 Memory Protection and Relocation option • KT11-B Paging Option • KUV11 Writeable Control Store Front panels: KY11-A • KY11-D • KY11-J • KY11-LA • KY11-LB • KY11-P More on buses: UNIBUS and QBUS termination • Bus Arbitration on the Unibus and QBUS • CTI BUS PDT-11s - PDT-11/110 • PDT-11/130 • PDT-11/150 CTI PDP-11s - PRO-325 • PRO-350 • PRO-380 Other: FIS floating point • PDP-11 Commercial Instruction Set • PDP-11 stacks • PDP-11 family differences |
