Difference between revisions of "Digital Data Communications Message Protocol"

From Computer History Wiki
Jump to: navigation, search
(Stubby but a start)
 
(External link: +1)
Line 3: Line 3:
 
It was originally designed by [[Digital Equipment Corporation|DEC]] for the [[DECnet]] Phase I network [[protocol suite]], in 1974. It was retained in later versions of DECnet, with modifications and extensions.
 
It was originally designed by [[Digital Equipment Corporation|DEC]] for the [[DECnet]] Phase I network [[protocol suite]], in 1974. It was retained in later versions of DECnet, with modifications and extensions.
  
==External link==
+
==External links==
  
 
* [http://decnet.ipv7.net/docs/dundas/aa-d599a-tc.pdf 'DDCMP Specification Version 4.0'], AA-D599A-TC (1 March 1978)
 
* [http://decnet.ipv7.net/docs/dundas/aa-d599a-tc.pdf 'DDCMP Specification Version 4.0'], AA-D599A-TC (1 March 1978)
 +
* [https://www.geeksforgeeks.org/digital-data-communications-message-protocol-ddcmp/ Digital Data Communications Message Protocol (DDCMP)] - Contains a good, detailed description of failure modes
  
 
{{semi-stub}}
 
{{semi-stub}}

Revision as of 10:07, 30 October 2020

The Digital Data Communications Message Protocol (DDCMP) is a byte-oriented data communication protocol for use over full-duplex and half-duplex point-to-point and multi-drop links; principally using using synchronous or asynchronous serial lines, although other communication channels were also supported. It used CRCs to allow transmission errors to be detected; sequence numbers allow detection of completely lost messages. Retransmission is used to correct both.

It was originally designed by DEC for the DECnet Phase I network protocol suite, in 1974. It was retained in later versions of DECnet, with modifications and extensions.

External links