Interdata 8/32

From Computer History Wiki
Revision as of 00:27, 21 September 2020 by ForOldHack (talk | contribs) (Real Information about the Interdata 7/32 and Interdata.)
Jump to: navigation, search

This was the one of the first non DEC, IBM 360 compatibilt Mainframe/Mini machine to run Unix.

According to Richard Miller, "The First Unix Port" The first port began in 1976, at Wollongong, on an Interdata 7/32, 192k-core/2x5Mb disk drives.

In April 28, 1977, Unix version 6 was booting. When Bell Labs was contacted:

In fact there was a surprise on both sides: a team at Bell Labs was in the midst of doing their own port of UNIX to an Interdata 8/32 (a slightly more powerful 32-bit mini-computer). They had begun work at the beginning of 1977 in anticipation of the delivery of their machine in April and had a kernel working by June less than two months after the Wollongong kernel first ran on the bare 7/32.

The Interdata 7/32 and 8/32 were the first 32-bit machines to both run Unix version 6, which had the Interdata 8/32 port becoming the basis for UNIX 7th Edition.

Oddly enough, real information about this machine is near nonexistent, short of the SIMH simulator.

The Interdata 7/32 and 8/32 were Plug Compatible Mainframes/Minis of the System 360, differing both in character sets, architecture and of course machine code.

Real Information about the Interdata 7/32 and Interdata.

Interdata Reference Manual 29-004R02 7/32

Interdata computer information general.

Publications about the first Unix Port

The First Unix Port, Miller, R.

The First port of Unix, Reinfelds, J.

Portability of C Programs and the UNIX System, Johnson, S.C. Ritchie, D. M.