KD11-Z CPU

The KD11-Z CPU was the CPU of the PDP-11/44; the letter code 'Z' was a tip to the fact that it was the last native UNIBUS PDP-11 CPU, and the last to be made out of discrete chips, and not a microprocessor.

The KD11-Z used the Extended UNIBUS for its bus to main memory, allowing it to have up to 4 mega-bytes of main memory. All devices were attached to a semi-separate UNIBUS (it and the EUB shared data lines, but not address lines); DMA devices could gain access to the memory via a UNIBUS map which connected the two, and mapped UNIBUS addresses to main memory addresses.

Full PDP-11 Memory Management and a cache (the KK11-B) were standard on all KD11-Z's. It also supported the optional FP11-F floating point (full FP11 floating point) and/or the KE44-A Commercial Instruction Set Processor (it could work with either, or both); these plugged into dedicated slots in the CPU backplane.

Details

The basic KD11-Z it consisted of five hex boards:

• M7094 Data Path module
• M7095 Control module
• M7096 Multifunction module
• M7097 KK11-B Cache module
• M7098 UNIBUS interface module

In addition, a single dual board, the M7090 Console Interface module, held a number of Berg connector headers used for various input/output functions.