Difference between revisions of "MM11-E and MM1-F core memories"

From Computer History Wiki
Jump to: navigation, search
(Interleaving on the MM11-E)
(Mostly in common boards)
Line 1: Line 1:
 
The '''MM11-E''' and '''MM11-F core memories''' were [[UNIBUS]] [[main memory]] units; the first UNIBUS memories produced by [[Digital Equipment Corporation|DEC]]. They came out with the first [[PDP-11]], the [[PDP-11/20]].
 
The '''MM11-E''' and '''MM11-F core memories''' were [[UNIBUS]] [[main memory]] units; the first UNIBUS memories produced by [[Digital Equipment Corporation|DEC]]. They came out with the first [[PDP-11]], the [[PDP-11/20]].
  
They were very similar - both 4K [[word]] (8K [[byte]]s); the MM11-F was capable of [[interleaving]] (although this capability was later made available to the MM11-E as well), and it also had a [[parity]] version available, the '''MM11-FP''' (which used a 4kx18 [[core memory|core plane]] instead of the 4Kx16 used in the MM11-E and MM11-F).
+
They were very similar - both 4K [[word]] (8K [[byte]]s), and most of the boards were in common. The MM11-F was capable of [[interleaving]] (although this capability was later made available to the MM11-E as well), and it also had a [[parity]] version available, the '''MM11-FP''' (which used a 4kx18 [[core memory|core plane]] instead of the 4Kx16 used in the MM11-E and MM11-F).
  
 
The MM11-F was also slightly faster: the MM11-E had an access time of 500 nsec and a cycle time of 1.2 μsec; the MM11-F had an access time of 400 nsec and a cycle time of 980 nsec.
 
The MM11-F was also slightly faster: the MM11-E had an access time of 500 nsec and a cycle time of 1.2 μsec; the MM11-F had an access time of 400 nsec and a cycle time of 980 nsec.

Revision as of 04:17, 29 May 2018

The MM11-E and MM11-F core memories were UNIBUS main memory units; the first UNIBUS memories produced by DEC. They came out with the first PDP-11, the PDP-11/20.

They were very similar - both 4K word (8K bytes), and most of the boards were in common. The MM11-F was capable of interleaving (although this capability was later made available to the MM11-E as well), and it also had a parity version available, the MM11-FP (which used a 4kx18 core plane instead of the 4Kx16 used in the MM11-E and MM11-F).

The MM11-F was also slightly faster: the MM11-E had an access time of 500 nsec and a cycle time of 1.2 μsec; the MM11-F had an access time of 400 nsec and a cycle time of 980 nsec.

They consisted of a quad H207 (non-parity) or H210 (parity) core plane board, along with a number of dual and single cards, plugged into a quad system unit. The MM11-F and MM11-FP used the same backplane; only the board set was slightly different

Board locations

These are the board locations for the MM11-E and F (as seen from the board side) of the backplane:

Connector Slot 4 Slot 3 Slot 2 Slot 1
A UNIBUS
Out
Power   UNIBUS
In
B G225% M109!
C H207
or
H210
G226 G226 G729@
or
H7290%
D G102 G102
E G102 G102 ++
F G226 G226 G103

++ = G225 (MM11-E) or G108 (MM11-FP)
@ = MM11-E only
% = MM11-F only
! = Possibly the later M1091

The M1091 could be used in the MM11-E as well as the MM11-F; the difference between the M109 and M1091 is the addition of additional jumpers to allow interleaving.