MM11-Y core memory

From Computer History Wiki
Revision as of 13:40, 1 October 2021 by Jnc (talk | contribs) (Complete the set)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The MM11-Y was a 64 Kbyte core main memory for PDP-11 UNIBUS machines. An MM11-Y was composed of two hex boards, one piggy-backed on the other, and the pair taking only a single backplane slot (electrically):

  • An H228-B daughter-board containing the cores
  • A G657 mother-board containing most of the electronics, and the contact fingers for plugging into a backplane

The MM11-Y did not use a custom backplane; it plugged into a standard MUD slot. The pair was 'thick' enough that a normal board cannot be plugged into the next slot; instead, a G727 grant continuity card must be used there (since it has no components on it, it just clears the H228-B card).

It provided parity, so technically its name was MM11-DP; it used an M7850 parity controller plugged into the same backplane as the MM11-D. The core array provided two more bits per word, to support byte parity..

It is possible to interleave a pair of MM11-Y's to provide reduced effective average access times.

Further reading

  • MM11-YP User's Manual (EK-MM1YP-UG) - not available online
  • MM11-YP Technical Manual (EK-MM1YP-TM-001) - not available online, exists in fiche

External links