MSV11-D/E MOS memory

From Computer History Wiki
Revision as of 16:40, 5 May 2020 by Jnc (talk | contribs) (Another potential error)
Jump to: navigation, search
M8044 memory card

The MSV11-D (M8044) was a dual-height QBUS DRAM main memory card; the MSV11-E (M8045) is identical (apparently even using the same etch PCB), but adds byte parity. They were used in the LSI-11 PDP-11.

They held 64KB when fully populated with 16Kx1 DRAM chips. Initially they used 4Kx1 DRAMs, giving 16KB when fully populated; later/larger ones used 16Kx1 DRAMs. The memory is arranged as 2 banks, each 16 data bits (one PDP-11 word) wide, optionally with 2 additional bits for parity (1 per byte) in the MSV11-E. Half-populating them (i.e. 1 bank only) produced 8KB and 322KB sized versions (depending on DRAM type).

Four versions of the parity/non-parity types exist:

  • MSV11-DA, -EA - 8KB (4K DRAMs)
  • MSV11-DB, -EB - 16KB (4K DRAMs)
  • MSV11-DC, -EC - 32KB (16K DRAMs)
  • MSV11-DD, -ED - 64KB (16K DRAMs)

All are Q18 (hence, could not be used in Q22 systems, such as PDP-11/23's with more than 256KB of memory). They had internal refresh.

Errors

Note that "M8045" and "32K 18 BIT MOS MEM" is shown in the etch of the PCB used in both the M8044 and M8045; this occasionally leads to them being mis-identified. A quick glance at the board in question will show whether the middle column of DRAM chips (used for parity) is present (notice they missing, in the image above, of an M8044), and whether it is half- or fully populated.

A card tagged "M8044-EH" has been seen; this is probably the result of a production error. The MSV11-DC is tagged 'M8044-Cx' (where 'x' varies, depending on the source of the DRAM chips used), and the MSV11-DD is tagged 'M8044-Dx' (likewise). An "M8044-EH" thus implies it is an MSV11-DE - which does not exist.