Difference between revisions of "MXV11-B Multifunction Option Module"

From Computer History Wiki
Jump to: navigation, search
(An OK start)
 
m (External links: +UG)
 
(3 intermediate revisions by the same user not shown)
Line 3: Line 3:
 
It contains two [[asynchronous serial line]]s (using the [[DL11 asynchronous serial line interface|DL11]] programming standard), an optional [[clock]], a block of [[main memory]], and some [[read-only memory|PROM]] for [[bootstrap]] purposes. The serial lines are connected via 10-pin [[Berg connector]] headers on the top edge of the card, using the standard [[DEC asynchronous serial line pinout]], and line 1 can be set to [[halt]] or boot the machine on a [[Asynchronous serial line#Break|break]].
 
It contains two [[asynchronous serial line]]s (using the [[DL11 asynchronous serial line interface|DL11]] programming standard), an optional [[clock]], a block of [[main memory]], and some [[read-only memory|PROM]] for [[bootstrap]] purposes. The serial lines are connected via 10-pin [[Berg connector]] headers on the top edge of the card, using the standard [[DEC asynchronous serial line pinout]], and line 1 can be set to [[halt]] or boot the machine on a [[Asynchronous serial line#Break|break]].
  
The clock is program-compatible with the [[KW11-L Line Time Clock]], but it is not a [[line time clock]], since it cannot be driven from [[alternating current|AC]] wall power; it can be connected to 50Hz, 60Hz, or 800Hz clock signals from a divided-down 20MHz crystal which is also used to provide the clock to the serial lines.
+
The clock is [[program compatible]] with the [[KW11-L Line Time Clock]], but it is not a [[line time clock]], since it cannot be driven from [[alternating current|AC]] wall power; it can be connected to 50Hz, 60Hz, or 800Hz clock signals from a divided-down 20MHz crystal which is also used to provide the clock to the serial lines.
  
 
The board contains 128Kbytes of [[Random Access Memory|RAM]]; it can hold a pair of 2, 4, 8 or 16KB ROMs.
 
The board contains 128Kbytes of [[Random Access Memory|RAM]]; it can hold a pair of 2, 4, 8 or 16KB ROMs.
  
[[Category: QBUS Serial Interfaces]]
+
==See also==
 +
 
 +
* [[MXV11-A Multifunction Option Module]]
 +
 
 +
<!-- ==Further reading==
 +
- not available online
 +
-->
 +
==External links==
 +
 
 +
* [https://manx-docs.org/collections/antonio/dec/mxv1bug1.pdf MXV11-B Multi-Function Option Module User Guide] (EK-MXV1B-UG-001)
 +
* [http://www.bitsavers.org/pdf/dec/qbus/Digital_Microcomputer_Products_Handbook_1985.pdf Microcomputer Products Handbook] - the MXV11-B is covered on pp. 18&ndash;1-18 (pp. 253-270 of the PDF)
 +
* [http://web.frainresearch.org:8080/projects/pdp-11/micronotes/micronote19.txt Disabling RAM on the MXV11-BF] (uNOTE #019)
 +
* [http://www.arclightindustries.com/pics/MXV11-B.pdf MXV11-B Multifunction Option Module]
 +
* [http://web.frainresearch.org:8080/projects/pdp-11/multifunction.php Multifunction Modules]
 +
 
 +
[[Category: QBUS Asynchronous Serial Interfaces]]
 
[[Category: QBUS Memories]]
 
[[Category: QBUS Memories]]
 
[[Category: QBUS ROMs]]
 
[[Category: QBUS ROMs]]

Latest revision as of 12:13, 17 February 2023

The MXV11-B Multifunction Option Module is a QBUS dual-height peripheral board (M7195), intended to allow the creation of complete systems in a minimal-sized QBUS backplane. It is very similar to the earlier MXV11-A Multifunction Option Module, except that it is a Q22 device.

It contains two asynchronous serial lines (using the DL11 programming standard), an optional clock, a block of main memory, and some PROM for bootstrap purposes. The serial lines are connected via 10-pin Berg connector headers on the top edge of the card, using the standard DEC asynchronous serial line pinout, and line 1 can be set to halt or boot the machine on a break.

The clock is program compatible with the KW11-L Line Time Clock, but it is not a line time clock, since it cannot be driven from AC wall power; it can be connected to 50Hz, 60Hz, or 800Hz clock signals from a divided-down 20MHz crystal which is also used to provide the clock to the serial lines.

The board contains 128Kbytes of RAM; it can hold a pair of 2, 4, 8 or 16KB ROMs.

See also

External links