Difference between revisions of "RK05 disk drive"

From Computer History Wiki
Jump to: navigation, search
m (Update controllers)
(Add image of head)
Line 14: Line 14:
 
}}
 
}}
  
The '''RK05''' was moving-head magnetic disk drive, most versions of which used removable packs, designed and manufactured by [[DEC]]. It was based on, but not completely compatible with, the earlier [[RK02]] and RK03 drives (which were sold by DEC, but not manufactured by them), which in turn were inspired by the IBM 2315 drive and pack.
+
[[Image:RK05CartridgeLoadedDoorOpen.jpg|200px|thumb|right|An RK05 with the door open, showing the removable pack (white plastic)]]
  
The pack contained a platter 14 inches in diameter, coated with iron oxide. Since the disk was hard sectored, platters used in the PDP-8 were physically incompatible with those used in the PDP-11, although the drives themselves were completely identical for both.
+
The '''RK05''' was moving-head magnetic [[disk drive]], most versions of which used removable packs. They were designed and manufactured by [[DEC]], and based on, but not completely compatible with, the earlier [[RK02]] and RK03 drives (which were sold by DEC, but not manufactured by them), which in turn were inspired by the IBM 2315 drive and pack.
  
The controller interface on the RK05 was mostly compatible with the earlier RK02/RK03, although it used a different 'drive select' mechanism, which allowed an [[RK11|RK11-D]] controller to support up to 8 RK05 drives on a single drive bus, as opposed to only 4 per bus with the earlier RK02/03 and RK11-C. The packs were compatible.
+
The pack contained a platter 14 inches in diameter, coated with iron oxide. Since the disk was hard sectored (using narrow slots cut through a projecting ring in the hub), packs used in the PDP-8 were physically incompatible with those used in the PDP-11, although the drives themselves were completely identical for both.
 +
 
 +
The controller interface on the RK05 was mostly compatible with the earlier RK02/RK03, although it used a different 'drive select' mechanism, which allowed an [[RK11|RK11-D]] controller to support up to 8 RK05 drives on a single drive bus, as opposed to only 4 per bus with the earlier RK02/03 and RK11-C system. The packs were compatible.
  
 
==RK05 models==
 
==RK05 models==
  
[[Image:RK05CartridgeLoaded.jpg|200px|thumb|right|A RK05 with a cartridge loaded]]
+
[[Image:RK05CartridgeLoaded.jpg|200px|thumb|right|An RK05 with a cartridge loaded]]
  
 
* RK05E - a version which contained many reliability enhancements
 
* RK05E - a version which contained many reliability enhancements
Line 30: Line 32:
 
==Other specifications==
 
==Other specifications==
  
[[Image:RK05CartridgeLoadedDoorOpen.jpg|200px|thumb|right|A RK05 with the door open]]
+
[[Image:RK05Head.jpg|200px|thumb|right|An RK05 head]]
  
 
* Data tracks - 203 (nominally 200 plus 3 spares; many systems used all 203, as reliability was high)
 
* Data tracks - 203 (nominally 200 plus 3 spares; many systems used all 203, as reliability was high)
Line 43: Line 45:
  
 
==External links==
 
==External links==
* [http://www.pdp8.net/rk05/rk05.shtml http://www.pdp8.net/rk05/rk05.shtml]
+
* [http://www.pdp8.net/rk05/rk05.shtml RK05 Drive Information]
  
 
[[Category: DEC Disk Drives]]
 
[[Category: DEC Disk Drives]]

Revision as of 20:39, 24 July 2017


RK05
Manufacturer: Digital Equipment Corporation
Drive Controller(s): RK8E (Omnibus)
RK11-D (UNIBUS)
RKV11-D (QBUS)
Capacity: 2.45 Mbytes (most versions)
Transfer Rate: 102 Kword/sec (RK8E)
90.1 Kword/sec (RK11)
Revolutions per Minute: 1500
Total Surfaces: 2
Words per Sector: 256
Tracks per Inch: 100
Density: 2200 bpi
Recording Method: Double Frequency NRZ


An RK05 with the door open, showing the removable pack (white plastic)

The RK05 was moving-head magnetic disk drive, most versions of which used removable packs. They were designed and manufactured by DEC, and based on, but not completely compatible with, the earlier RK02 and RK03 drives (which were sold by DEC, but not manufactured by them), which in turn were inspired by the IBM 2315 drive and pack.

The pack contained a platter 14 inches in diameter, coated with iron oxide. Since the disk was hard sectored (using narrow slots cut through a projecting ring in the hub), packs used in the PDP-8 were physically incompatible with those used in the PDP-11, although the drives themselves were completely identical for both.

The controller interface on the RK05 was mostly compatible with the earlier RK02/RK03, although it used a different 'drive select' mechanism, which allowed an RK11-D controller to support up to 8 RK05 drives on a single drive bus, as opposed to only 4 per bus with the earlier RK02/03 and RK11-C system. The packs were compatible.

RK05 models

An RK05 with a cartridge loaded
  • RK05E - a version which contained many reliability enhancements
  • RK05J - the final version
  • RK05F - a version using a permanently installed platter, which allowed it to operate at twice the track density of the standard RK05, doubling the capacity of the drive; a single RK05F emulated two normal RK05 drives

Other specifications

An RK05 head
  • Data tracks - 203 (nominally 200 plus 3 spares; many systems used all 203, as reliability was high)
  • Average access time - 70 msec
  • Time for 1/2 revolution - 20 msec
  • One track seek - 10 msec
  • Average seek - 50 msec
  • Maximum seek - 85 msec
  • Physical size - 19" W x 10.5" H x 26.5" L
  • Weight - 110 pounds
  • Power consumption - 230 VA (running); 1150 VA (starting, 2 sec)

External links