Difference between revisions of "RK8-E disk controller"
From Computer History Wiki
(New page: {{stub}} The RK8E was the PDP-8 Omnibus disk controller for the RK05. The boards were designated the M7104, M7105 and M7106.) |
m (Jnc moved page RK8E to RK8-E disk controller: standard naming system) |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | The '''RK8-E disk controller''' was the [[PDP-8 family|PDP-8]] [[OMNIBUS]] [[disk]] [[device controller]] for the [[RK05 disk drive]]. A single RK8-E could handle up to four RK05 drives. It used the [[single cycle data break]] form of [[Direct Memory Access|DMA]] to transfer data directly to [[main memory]]. It uses blocks of 256 words; data transfers can range from 128 words up. It uses a [[Cyclic redundancy check|CRC]] for data error detection. | |
| − | The | ||
| − | The boards were | + | ==Hardware== |
| + | |||
| + | The [[DEC card form factor|quad]] boards which made up the RK8E were the M7104, M7105 and M7106; they plug into an OMNIBUS [[backplane]]. | ||
| + | |||
| + | {{semi-stub}} | ||
| + | |||
| + | ==See also== | ||
| + | |||
| + | * [[RK08-P Disk Interface Control]] | ||
| + | |||
| + | [[Category: OMNIBUS Storage Controllers]] | ||
Latest revision as of 18:25, 29 April 2021
The RK8-E disk controller was the PDP-8 OMNIBUS disk device controller for the RK05 disk drive. A single RK8-E could handle up to four RK05 drives. It used the single cycle data break form of DMA to transfer data directly to main memory. It uses blocks of 256 words; data transfers can range from 128 words up. It uses a CRC for data error detection.
Hardware
The quad boards which made up the RK8E were the M7104, M7105 and M7106; they plug into an OMNIBUS backplane.
