RP04 disk drive

From Computer History Wiki
Revision as of 21:34, 2 October 2017 by Jnc (talk | contribs) (Pretty stubby, but a start)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


RP04
Drive Controller(s): RH11 (UNIBUS)
Capacity: 88 Mbytes
Transfer Rate: 2.5 usec/word
Revolutions per Minute: 3600
1/2 Revolution Time: 8.3 msec
One Track Seek Time: 7 msec
Average Seek Time: 28 msec
Maximum Seek Time: 50 msec
Total Surfaces: 19
Words per Sector: 256
Density: 4040 bpi (maximum)
Recording Method: Modified Frequence Modulation
Physical Size: 31" W x 40" H x 32" L
Weight: 600 pounds
Power Consumption: 660 VA per phase (running); 3300 VA per phase(starting, 10 seconds max)


The RP04 was the successor to the RP02 and RP03 multi-platter large disk drives. It used a pack compatible with the IBM 3336 pack, used on the IBM 3330 drive.

It was the first large drive to use the MASSBUS bus; thus, it did not have a specific device controller, but used the appropriate MASSBUS controller. A maximum of 8 drives were supported per controller.