Difference between revisions of "RP10 disk controller"

From Computer History Wiki
Jump to: navigation, search
m (+cat)
(+External links)
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
The '''RP10 disk controller''' is a [[disk]] [[device controller]] primarily for the early [[PDP-10]] models ([[KA10]] and [[KI10]]) which had the PDP-10 [[input/output|I/O]] [[bus]] as a standard bus.
+
The '''RP10 disk controller''' is a [[disk]] [[device controller]] for the [[PDP-10]], primarily for the early models ([[KA10]] and [[KI10]]) which had the PDP-10 [[input/output|I/O]] [[bus]] as a standard bus.
  
It works with the [[RP01 disk drive|RP01]], [[RP02 disk drive|RP02]] and [[RP03 disk drive]]s; up to 8 drives per controller. It uses a [[DF10 Data Channel]] unit to perform [[Direct Memory Access|DMA]] to [[main memory]].
+
It works with the [[RP01 disk drive|RP01]], [[RP02 disk drive|RP02]] and [[RP03 disk drive]]s; up to 8 drives per controller. It is paired with a [[DF10 Data Channel]] unit which performs [[Direct Memory Access|DMA]] to [[main memory]].
  
 
The RP10 has the ability to perform [[seek]]s on multiple drives simultaneously.
 
The RP10 has the ability to perform [[seek]]s on multiple drives simultaneously.
  
 
{{semi-stub}}
 
{{semi-stub}}
 +
 +
==See also==
 +
 +
* [[RH10 MASSBUS controller]]
 +
 +
==External links==
 +
 +
* [http://bitsavers.org/pdf/dec/pdp10/periph/RP10_Product_Description.pdf RP10 Product Description]
 +
* [http://bitsavers.org/pdf/dec/pdp10/periph/DEC-10-HRPC-D_RP10-C_Disk_Pack_Synchronizer_Maint_Oct73.pdf RP10-C Disk Pack Synchronizer Maintenance Manual]
 +
* [http://bitsavers.org/pdf/dec/pdp10/periph/RP10_Engineering_Drawings.pdf RP10 Engineering Drawings]
  
 
[[Category: DEC Storage Controllers]]
 
[[Category: DEC Storage Controllers]]
 +
[[Category: PDP-10 Peripherals]]

Revision as of 16:11, 14 October 2021

The RP10 disk controller is a disk device controller for the PDP-10, primarily for the early models (KA10 and KI10) which had the PDP-10 I/O bus as a standard bus.

It works with the RP01, RP02 and RP03 disk drives; up to 8 drives per controller. It is paired with a DF10 Data Channel unit which performs DMA to main memory.

The RP10 has the ability to perform seeks on multiple drives simultaneously.

See also

External links