Unix dump/restore tape format

From Computer History Wiki
Revision as of 11:49, 8 September 2022 by Larsbrinkhoff (talk | contribs) (Inode data.)
Jump to: navigation, search

The Unix dump command makes a full or incremental backup of a single disk partition to magnetic tapes. The corresponding restore command recovers data from such tapes. The tape format is vaguely documented in various man pages, but not to a detail necessary to fully understand it.

A dump is logically a series of 1024-byte blocks, grouped ten at a time into tape records. A block can be a header, or data. Header blocks hold metadata and inode information.

Dumps will normally span several tapes. All tapes begin with a TS_TAPE block. The last tape ends with one or several TS_END blocks. The first tape will have TS_BITS and TS_CLRI blocks after TS_TAPE. The rest of the tape blocks are of type TS_INODE, storing raw inodes as stored on disk, followed by data blocks. In some cases a TS_INODE header can not store all information needed, in which case it can be extended with TS_ADDR blocks. Normally the first inodes written to tape is the entire directory structure of the whole file system, and file inodes make up the rest of the tapes.

The tape format comes in two versions. The first version is for the older UNIX file system, and the second version is for Berkeley's FFS file system. On top of that, data can be 16 or 32 bits wide, and big or little endian.

Details to follow. It's a bit of a mess.

TAPE HEADER

This data is common to all headers, but some of the fields may be valid or ignored depending on the header type.

An int is 16 or 32 bits depending on the host.

Name Description Size Value (old, new format)
Type Header type int TS_TAPE, TS_BITS, TS_CLRI, TS_INODE, TS_ADDR, TS_END
Date Date of dump 32 bits Timestamp
DDate Dump from 32 bits Timestamp
Volume Tape number int Tape in dump, from 1
Tapea Block number 32 bits Block in dump across tapes, from 1
Inumber Inode number int File system inode number
Magic Format identifier int 60011 60012
Inode Inode data 64 or 128 bytes As stored on disk
Count Number of addr bytes int
Addr Data present Array of bytes 0 or 1

The inode data looks like this:

Name Old Size New Size
Mode 16 bits 16 bits
Nlink 16 bits 16 bits
Uid 16 bits 16 bits
Gid 16 bits 16 bits
Size 32 bits 64 bits
Addr 40 bytes Not present
Atime 32 bits 32 bits
 ? Not present 32 bits
Mtime 32 bits 32 bits
 ? Not present 32 bits
Ctime 32 bits 32 bits
 ? Not present 92 bytes