Difference between revisions of "TU10 DECmagtape"

From Computer History Wiki
Jump to: navigation, search
(Add info)
(Add module chart)
Line 6: Line 6:
 
|}}
 
|}}
  
−
Classic big tape drive, able to store 5-20 MB on a 2400' 0.5" wide tape. It supports 7-track operation at 200, 556, and 800 BPI, and 9-track at 800 BPI. It uses a [[TM11 magtape controller]] to connect to [[UNIBUS]] [[PDP-11]]'s.
+
A classic big tape drive, able to store 5-20 Mytes on a 2400' 0.5" wide tape. It supports 7-track operation at 200, 556, and 800 BPI, and 9-track at 800 BPI.
 +
 
 +
The drive contains a fair amount of electronics, in the form of [[FLIP CHIP]] modules in a 19' wide wirewrap backplane.
 +
 
 +
It uses a [[TM11 magtape controller]] to connect to [[UNIBUS]] [[PDP-11]]'s. The controller connects to a 'Master' drive, which includes extra modules in the backplane; details of the controller-Master interface are given [[TM11 magtape controller#Drive Connection|here]].
 +
 
 +
Additional 'Slave' drives (up to sever) may be connected to the Master drive.
 +
 
 +
==Module Locations==
 +
 
 +
This is the module location chart for Master drives:
 +
 
 +
{| class="wikitable"
 +
! Slot !! Top !! Bottom
 +
|-
 +
| 1 || colspan="2" style="text-align:center;" | G933
 +
|-
 +
| 2 || colspan="2" style="text-align:center;" | G933
 +
|-
 +
| 3 || colspan="2" style="text-align:center;" | G9341
 +
|-
 +
| 4 || colspan="2" style="text-align:center;" | G932
 +
|-
 +
| 5 || M908@ || G9340
 +
|-
 +
| 6 || M958%%
 +
|-
 +
| 7 || colspan="2" style="text-align:center;" | M929@
 +
|-
 +
| 8 || colspan="2" style="text-align:center;" | M640
 +
|-
 +
| 9 || colspan="2" style="text-align:center;" | M891
 +
|-
 +
| 10 || colspan="2" style="text-align:center;" | M7673
 +
|-
 +
| 11 || colspan="2" style="text-align:center;" | M7672
 +
|-
 +
| 12 || colspan="2" style="text-align:center;" | M892
 +
|-
 +
| 13 || colspan="2" style="text-align:center;" | M895
 +
|-
 +
| 14 || colspan="2" style="text-align:center;" | M7671
 +
|-
 +
| 15 || M100 || M896
 +
|-
 +
| 16 || M7670
 +
|-
 +
| 17 || M903@ || G741YA%
 +
|-
 +
| 18 || M903@ || G741%
 +
|-
 +
| 19 || M903@ || G741%
 +
|-
 +
| 20 || colspan="2" style="text-align:center;" | M768
 +
|-
 +
| 21 || colspan="2" style="text-align:center;" | M514
 +
|-
 +
| 22 || M922@ || M767
 +
|-
 +
| 23 || M050 || W726
 +
|-
 +
| 24 || colspan="2" style="text-align:center;" | M890
 +
|-
 +
| 25 || colspan="2" style="text-align:center;" | M769
 +
|-
 +
| 26 || colspan="2" style="text-align:center;" | M763
 +
|-
 +
| 27 || colspan="2" style="text-align:center;" | G350
 +
|-
 +
| 28 || colspan="2" style="text-align:center;" | M765
 +
|-
 +
| 29 || colspan="2" style="text-align:center;" | G064
 +
|-
 +
| 30 || colspan="2" style="text-align:center;" | G062
 +
|-
 +
| 31 || colspan="2" style="text-align:center;" | G060
 +
|-
 +
| 32 || colspan="2" style="text-align:center;" | G050
 +
|}
 +
 
 +
@ = Cable<br>
 +
% = only at end of bus, M903 cable otherwise<br>
 +
%% = Not required when used with a TM1 control
 +
 
 +
Slots 6-15 are empty in Slave drives.
  
 
[[Category:Tape Drives]]
 
[[Category:Tape Drives]]

Revision as of 19:20, 18 September 2016


TU10
Tu10.jpg
TU 10 drive
Manufacturer: Digital Equipment Corporation


A classic big tape drive, able to store 5-20 Mytes on a 2400' 0.5" wide tape. It supports 7-track operation at 200, 556, and 800 BPI, and 9-track at 800 BPI.

The drive contains a fair amount of electronics, in the form of FLIP CHIP modules in a 19' wide wirewrap backplane.

It uses a TM11 magtape controller to connect to UNIBUS PDP-11's. The controller connects to a 'Master' drive, which includes extra modules in the backplane; details of the controller-Master interface are given here.

Additional 'Slave' drives (up to sever) may be connected to the Master drive.

Module Locations

This is the module location chart for Master drives:

Slot Top Bottom
1 G933
2 G933
3 G9341
4 G932
5 M908@ G9340
6 M958%%
7 M929@
8 M640
9 M891
10 M7673
11 M7672
12 M892
13 M895
14 M7671
15 M100 M896
16 M7670
17 M903@ G741YA%
18 M903@ G741%
19 M903@ G741%
20 M768
21 M514
22 M922@ M767
23 M050 W726
24 M890
25 M769
26 M763
27 G350
28 M765
29 G064
30 G062
31 G060
32 G050

@ = Cable
% = only at end of bus, M903 cable otherwise
%% = Not required when used with a TM1 control

Slots 6-15 are empty in Slave drives.

Retrieved from "https://gunkies.org/w/index.php?title=TU10_DECmagtape&oldid=12281"