TU10 DECmagtape
| TU10 | |
 TU10 drive | |
| Tape speed: | 45 ips (Forward/Reverse) 150 ips (Rewind) |
|---|---|
| Size: | 19"W x 26"D x 26"H |
| Weight: | 150 lbs |
The TU10 is a classic big tape drive from Digital Equipment Corporation, able to store 5-20 Mytes on a 2400' 0.5" wide tape. It supports 7-track operation at 200, 556, and 800 BPI, and 9-track at 800 BPI. The drive contains a fair amount of electronics, in the form of FLIP CHIP modules in a 19" wide wirewrap backplane (mounted fore and aft in the drive itself).
It was first used with the PDP-10; to connect to UNIBUS PDP-11's, a TM11 magtape controller is used. The TM11 controller connects to a 'Master' drive, which includes extra modules in the backplane; additional 'Slave' drives (up to seven) may be connected to the Master drive. Details of the controller-Master interface are given here.
Module Locations
This is the module location chart for Master drives:
| Slot | Top | Bottom |
|---|---|---|
| 1 | G933 | |
| 2 | G933 | |
| 3 | G9341 | |
| 4 | G932 | |
| 5 | M908@ | G9340 |
| 6 | M958%% | |
| 7 | M929@ | |
| 8 | M640 | |
| 9 | M891 | |
| 10 | M7673 | |
| 11 | M7672 | |
| 12 | M892 | |
| 13 | M895 | |
| 14 | M7671 | |
| 15 | M100 | M896 |
| 16 | M7670 | |
| 17 | M903@ | G741YA% |
| 18 | M903@ | G741% |
| 19 | M903@ | G741% |
| 20 | M768 | |
| 21 | M514 | |
| 22 | M922@ | M767 |
| 23 | M050 | W726 |
| 24 | M890 | |
| 25 | M769 | |
| 26 | M763 | |
| 27 | G350 | |
| 28 | M765 | |
| 29 | G064 | |
| 30 | G062 | |
| 31 | G060 | |
| 32 | G050 | |
@ = Cable
% = only at end of device bus; M903 cable otherwise
%% = Not required when used with a TM1 control
Slots 6-15 are empty in Slave drives.
