View source for BA11-L mounting box

The '''BA11-L mounting box''' was for many years a standard [[DEC card form factor|hex]] [[system unit]] [[backplane]] mounting box for the [[H960 rack|H960]] series of 19"-wide racks produced by [[Digital Equipment Corporation|DEC]], one of the [[BA11 mounting boxes]].

The H960 racks provided 63" of vertical mounting space, divided into units of 10-1/2", which were further subdividable into a pair of 5-1/4" spaces. The 5-1/4" tall BA11-L mounting box was designed for these spaces, and could contain up to 2 standard size (4-slot) system units.

BA11-L's were used in both 'basic box' and 'expansion box' roles. The latter was used to hold extra devices, and had a blank front panel. The former contained the [[Central Processing Unit|CPU]], and had a front panel of some sort - either a programmer's console, or an operator's console.

In the [[PDP-11/04]] (the model which used this mounting box to hold the CPU, although the [[PDP-11/34]] was occasionally seen in one) the front panels were the [[KY11-LA Operator's Console]] and the [[KY11-LB Programmer's Console]] (the same for both CPU's).

The system units were mounted longitudinally, facing sideways; they were generally mounted with the [[DEC edge connector contact identification|A-row connectors]] at the back, next to the power distribution panel. 

The BA11-L came with the [[H777 power supply]], which came in several versions, with different mixes of voltages supplied. The supply was a separate unit, also mounted longitudinally in the box, at the side. The supply included a power distribution panel containing standard [[DEC power distribution connectors]].

A single cooling fan was mounted at the front of the box, to provide air-flow to the boards; the power supply had its own internal fan, at the front.

The BA11-L's dimensions were 5-1/4" high, 19" wide, and 25" deep; it weighed 45 lbs (without the backplanes or boards).

[[Category: DEC Hardware]]