View source for FPF11 floating point processor

The '''FPF11 floating point processor''' is an optional [[co-processor]] module which provides high-performance [[floating point]] for [[KDF11 CPUs]] which use the [[F-11 chip set]]; it implements [[FP11 floating point|FP11]]-compatible [[floating point]].

It is a [[DEC card form factor|quad]] [[printed circuit board|board]] (the M8188) which plugs into the [[backplane]] slot next to the [[Central Processing Unit|CPU]] board. It only gets power from the backplane, though; a [[flat cable]] connects the FPF11 to the CPU board, and plugs into the [[chip socket]] which the [[KEF11-A floating point chip]] normally goes into.

That socket gives the FPF11 access to both the [[data bus]] and the [[microcode|microinstruction]] [[bus]] on the CPU card. The FPF11 contains [[microcode]] to control both the main CPU, and the floating point [[hardware]] on the FPF11. The main CPU is sent [[no-op]] microinstructions when there is nothing for it to do; e.g. when the FPF11 does not need it to [[fetch]] data from, or [[store]] it in, [[main memory]].

Control of the main CPU is transferred to the FPF11 in the same way as to the KEF11-A when a floating point instruction is seen, but while the latter uses the hardware on the CPU to perform all its calcuations, the FPF11 has extensive hardware to perform floating point calculations at higher performance on-board. The FPF11 has its own [[clock]], and its microcode can select cycles of different durations, as needed; the FPF11 can re-synchronize with the main CPU when control is to be transferred back to it at the end of the floating point instruction.

The floating point [[register]]s are actually on the FPF11 (probably for performance), unlike those for the KEF11-A, which are in the [[KTF11-A memory management chip]].

[[Category: PDP-11 Processors]]