Difference between revisions of "RL01/02 disk drive"
From Computer History Wiki
(Add a bunch of data) |
(Add a few more data items, note brushes on early units) |
||
| Line 11: | Line 11: | ||
| average seek = 55 msec | | average seek = 55 msec | ||
| maximum seek = 100 msec | | maximum seek = 100 msec | ||
| + | | head switch = 8 msec (maximum) | ||
| surfaces = 2 | | surfaces = 2 | ||
| tracks = 256 | | tracks = 256 | ||
| Line 18: | Line 19: | ||
| density = 3725 bpi (maximum) | | density = 3725 bpi (maximum) | ||
| recording method = [[Modified Frequence Modulation]] (MFM) | | recording method = [[Modified Frequence Modulation]] (MFM) | ||
| + | | start time = 40 seconds | ||
| + | | stop time = 30 seconds | ||
| physical size = 19" W x 10-1/2" H x 25" L | | physical size = 19" W x 10-1/2" H x 25" L | ||
| weight = 55 pounds | | weight = 55 pounds | ||
| Line 30: | Line 33: | ||
[[Image:rl01drive.jpg|150px|thumb|left|RL01 drive]] | [[Image:rl01drive.jpg|150px|thumb|left|RL01 drive]] | ||
| + | |||
| + | Early versions of the drive included a set of brushes that swing out over the [[platter]] on start-up; these were deleted in later versions. | ||
The [[QBUS]] controllers are the [[RLV11]] and [[RLV12]], the latter being the [[QBUS|Q22]] version. | The [[QBUS]] controllers are the [[RLV11]] and [[RLV12]], the latter being the [[QBUS|Q22]] version. | ||
Revision as of 14:08, 5 October 2017
| RL01 | |
| Manufacturer: | Digital Equipment Corporation |
|---|---|
| Drive Controller(s): | RL11 (UNIBUS) |
| Capacity: | 5.2 Mbytes (formatted) |
| Transfer Rate: | 512 Kbytes/sec 3.9 usec/word (peak) |
| Average Access Time: | 67.5 msec |
| Revolutions per Minute: | 2400 |
| 1/2 Revolution Time: | 12.5 msec |
| One Track Seek Time: | 15 msec |
| Average Seek Time: | 55 msec |
| Maximum Seek Time: | 100 msec |
| Head Switching Time: | 8 msec (maximum) |
| Total Surfaces: | 2 |
| Tracks per Surface: | 256 |
| Sectors per Track: | 40 |
| Words per Sector: | 128 |
| Tracks per Inch: | 125 |
| Density: | 3725 bpi (maximum) |
| Recording Method: | Modified Frequence Modulation (MFM) |
| Start Time: | 40 seconds |
| Stop Time: | 30 seconds |
| Physical Size: | 19" W x 10-1/2" H x 25" L |
| Weight: | 55 pounds |
| Power Consumption: | 160W (running); 550 VA (starting) |
The RL01 is a 5MiB, single platter, removable pack disk drive introduced in 1976 by Digital Equipment Corporation. It used an IBM 5440 type pack, as used on the IBM System/3.
To keep the heads properly aligned on the tracks, it used a servo system driven by servo data written on the pack (along with sector headers) at the factory; packs cannnot be low-level re-formatted in the field.
Early versions of the drive included a set of brushes that swing out over the platter on start-up; these were deleted in later versions.
The QBUS controllers are the RLV11 and RLV12, the latter being the Q22 version.
The RL02 is a higher density version, with twice as many tracks.
