Difference between revisions of "Resistor-transistor logic"
(Pretty stubby,but a decent start) |
(low noise immunity) |
||
| Line 1: | Line 1: | ||
'''Resistor-transistor logic''' (often referred to by its acronym, '''RTL''') was the earliest [[logic]] [[circuit]] family using [[bipolar]] [[transistor]]s; it was later essentially completely replaced by the later [[diode-transistor logic]]. | '''Resistor-transistor logic''' (often referred to by its acronym, '''RTL''') was the earliest [[logic]] [[circuit]] family using [[bipolar]] [[transistor]]s; it was later essentially completely replaced by the later [[diode-transistor logic]]. | ||
| − | The name comes from the fact that the logic functions were performed by [[resistor]] networks; the signal-amplification was performed by a [[transistor]]. The use of resistors was good in the pre-IC stage (when discrete transistors were expensive), but it limited the number of inputs. | + | The name comes from the fact that the logic functions were performed by [[resistor]] networks; the signal-amplification was performed by a [[transistor]]. |
| + | |||
| + | The use of resistors was good in the pre-IC stage (when discrete transistors were expensive), but it limited the number of inputs. The use of resistors for the logic network also led to minimal [[noise immunity]], probably the biggest drawback of DTL. | ||
Is it notable as being the logic family in the first [[integrated circuit]]s, produced by [[Fairchild Semiconductor]]; those ICs were used in the [[Apollo Guidance Computer]]. | Is it notable as being the logic family in the first [[integrated circuit]]s, produced by [[Fairchild Semiconductor]]; those ICs were used in the [[Apollo Guidance Computer]]. | ||
Revision as of 03:25, 15 September 2018
Resistor-transistor logic (often referred to by its acronym, RTL) was the earliest logic circuit family using bipolar transistors; it was later essentially completely replaced by the later diode-transistor logic.
The name comes from the fact that the logic functions were performed by resistor networks; the signal-amplification was performed by a transistor.
The use of resistors was good in the pre-IC stage (when discrete transistors were expensive), but it limited the number of inputs. The use of resistors for the logic network also led to minimal noise immunity, probably the biggest drawback of DTL.
Is it notable as being the logic family in the first integrated circuits, produced by Fairchild Semiconductor; those ICs were used in the Apollo Guidance Computer.
External links
- RTL article on Wikipedia - has comprehensive coverage of the topic
