Difference between revisions of "MF10 core memory"
m (typos) |
(+parity, access time) |
||
| Line 1: | Line 1: | ||
| − | The '''MF10''' was a [[core memory|core]] [[main memory]] system for the mid-period [[PDP-10]]s, principally the [[KI10]], although it was also used on early [[KL10]]s. It connected to the so-called external memory bus of either the 18-bit or 22-bit [[address]] form. An MF10 contained either 32KW or 64KW, and | + | The '''MF10''' was a [[core memory|core]] [[main memory]] system for the mid-period [[PDP-10]]s, principally the [[KI10]], although it was also used on early [[KL10]]s. It connected to the so-called external memory bus of either the 18-bit or 22-bit [[address]] form. An MF10 contained either 32KW or 64KW; [[parity]] was provided to protect the memory contents. It had an [[access time]] of 0.61 μseconds, and a [[cycle time]] of 0.95 µseconds. |
It was a [[multi-port memory]], with 4 ports per memory system: each port can be independently disabled. The [[Central Processing Unit|CPU]] uses one port (in a [[multi-processor]] system, one per CPU); the others are used by [[channel]]s (such as a [[DF10 Data Channel|DF10]]) for [[mass storage]] such as [[disk]]s. | It was a [[multi-port memory]], with 4 ports per memory system: each port can be independently disabled. The [[Central Processing Unit|CPU]] uses one port (in a [[multi-processor]] system, one per CPU); the others are used by [[channel]]s (such as a [[DF10 Data Channel|DF10]]) for [[mass storage]] such as [[disk]]s. | ||
Revision as of 04:54, 10 March 2019
The MF10 was a core main memory system for the mid-period PDP-10s, principally the KI10, although it was also used on early KL10s. It connected to the so-called external memory bus of either the 18-bit or 22-bit address form. An MF10 contained either 32KW or 64KW; parity was provided to protect the memory contents. It had an access time of 0.61 μseconds, and a cycle time of 0.95 µseconds.
It was a multi-port memory, with 4 ports per memory system: each port can be independently disabled. The CPU uses one port (in a multi-processor system, one per CPU); the others are used by channels (such as a DF10) for mass storage such as disks.
Each port could be independently set for its address, and for either 2- or 4-way interleaving (using address bits 35 and 19 or 20, depending on the size; and bits 34 and either 18 or 19, depending; respectively).
