Difference between revisions of "Register"
(Stubby, but a start) |
(Register renaming) |
||
(7 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
− | A '''register''' is a special | + | A '''register''' is a special small [[memory]] unit; usually within a [[Central Processing Unit|CPU]], i.e. not part of the machine's [[main memory]], although [[device controller]]s usually include registers too. For the ones which are part of the CPU, access to them is very fast - usually faster than main memory. |
− | The first computers did not include many registers in the CPU, since each register needs separate hardware, and that was a | + | The first computers did not include many registers in the CPU, since each register needs separate [[hardware]], and that was a scarce resource early on. Many machines only had a single register available for doing computations with, the '''accumulator'''; these machines were typically a [[load-store architecture]]. |
+ | |||
+ | Later on, hardware was not so much of an issue, but computers still tend to have somewhat limited numbers of programmer-visible registers, because they are named by fields in [[instruction]]s, and [[bit]]s in the instruction [[word]] are (and always will be) a limited resource. ([[Register renaming]] was developed to allow more registers to be used, without being able to explicitly name them.) | ||
==See also== | ==See also== | ||
Line 8: | Line 10: | ||
* [[Program Counter]] | * [[Program Counter]] | ||
− | {{stub}} | + | {{semi-stub}} |
+ | |||
+ | [[Category:Hardware Basics]] |
Latest revision as of 12:10, 14 May 2021
A register is a special small memory unit; usually within a CPU, i.e. not part of the machine's main memory, although device controllers usually include registers too. For the ones which are part of the CPU, access to them is very fast - usually faster than main memory.
The first computers did not include many registers in the CPU, since each register needs separate hardware, and that was a scarce resource early on. Many machines only had a single register available for doing computations with, the accumulator; these machines were typically a load-store architecture.
Later on, hardware was not so much of an issue, but computers still tend to have somewhat limited numbers of programmer-visible registers, because they are named by fields in instructions, and bits in the instruction word are (and always will be) a limited resource. (Register renaming was developed to allow more registers to be used, without being able to explicitly name them.)