Difference between revisions of "RP10 disk controller"
From Computer History Wiki
m (link to new page) |
m (typo) |
||
| Line 1: | Line 1: | ||
| − | The '''RP10 disk controller''' is a [[disk]] [[device controller]] for the [[PDP-10]], primarily for the early models ([[KA10]] and [[KI10]]) which had the [[PDP-10 I/O | + | The '''RP10 disk controller''' is a [[disk]] [[device controller]] for the [[PDP-10]], primarily for the early models ([[KA10]] and [[KI10]]) which had the [[PDP-10 I/O Bus]] as a standard bus. It is always paired with a [[DF10 Data Channel]] unit which performs [[Direct Memory Access|DMA]] to [[main memory]]. |
It works with the [[RP01 disk drive|RP01]], [[RP02 disk drive|RP02]] and [[RP03 disk drive]]s; up to 8 drives per controller. The RP10 has the ability to perform [[seek]]s on multiple drives simultaneously. | It works with the [[RP01 disk drive|RP01]], [[RP02 disk drive|RP02]] and [[RP03 disk drive]]s; up to 8 drives per controller. The RP10 has the ability to perform [[seek]]s on multiple drives simultaneously. | ||
Revision as of 13:52, 25 October 2022
The RP10 disk controller is a disk device controller for the PDP-10, primarily for the early models (KA10 and KI10) which had the PDP-10 I/O Bus as a standard bus. It is always paired with a DF10 Data Channel unit which performs DMA to main memory.
It works with the RP01, RP02 and RP03 disk drives; up to 8 drives per controller. The RP10 has the ability to perform seeks on multiple drives simultaneously.
