Difference between revisions of "H754 +20V, -5V Regulator"
m (Avoid redir after move) |
m (+docs) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 7: | Line 7: | ||
{{semi-stub}} | {{semi-stub}} | ||
| − | [[Category: DEC | + | ==External links== |
| + | |||
| + | * [http://www.bitsavers.org/pdf/dec/pdp11/1140/1140_SystemManual.pdf PDP-11/40, -11/35 (21 inch chassis) system manual] (EK-11040-TM-002)- the H754 is covered in Section 6.4.4a (pg. 115 of the scanned version) | ||
| + | * [http://www.bitsavers.org/pdf/dec/pdp11/1160/EK-11060-SV-01_1160cab_Feb78.pdf PDP-11/60 cabinet and power supply manual] - the H754 is covered in Section 3.3.3 (pp. 53-54 of the scanned version) | ||
| + | * [http://www.bitsavers.org/pdf/dec/pdp11/1155/MP00039_1155vol1_Mar76.pdf 11/55 Vol. 1 Field Maintenance Print Set] (MP00039) - the H754 is covered on pp. 167-172 of the scanned version | ||
| + | |||
| + | [[Category: DEC Power Supplies]] | ||
Latest revision as of 16:38, 10 July 2023
The H754 +20V, -5V Regulator is one of the DEC standard modular regulators. It can produce an output current of up to 8A at an output voltage of +20V, and up to 1A at -5V. (Technically, the two trade off with each other, so if there is less +20V being drawn, more -5V can be drawn, up to a maximum of 8A.) It has over-current and over-voltage detection and protection.
It was a switching power supply, one of the earliest; however, the basic concept was somewhat different from later supplies of this type. It takes as input AC at a voltage of 20V-30V, runs it through a diode bridge and filter capacitor to convert it to DC. That is then used to produce a 25V output (+20V to -5V); a pair of shunt voltage regulators then produce the two output voltages.
It took its AC input on pins 7 and 8; the +20V output was on pin 5, the -5V on pin 3, and the ground return on pin 2. Pins 1, 4 and 6 were not connected.
External links
- PDP-11/40, -11/35 (21 inch chassis) system manual (EK-11040-TM-002)- the H754 is covered in Section 6.4.4a (pg. 115 of the scanned version)
- PDP-11/60 cabinet and power supply manual - the H754 is covered in Section 3.3.3 (pp. 53-54 of the scanned version)
- 11/55 Vol. 1 Field Maintenance Print Set (MP00039) - the H754 is covered on pp. 167-172 of the scanned version
