Difference between revisions of "RC25 disk drive"
From Computer History Wiki
m (Have the more-specific cat) |
(Add infobox) |
||
Line 1: | Line 1: | ||
− | + | {{Infobox Disk drive | |
+ | | name = RC25 | ||
+ | | manufacturer = [[Digital Equipment Corporation|DEC]] | ||
+ | <!-- | year introduced = | ||
+ | | year discontinued = --> | ||
+ | | controller = [[KLESI Low-End Storage Interconnect]] | ||
+ | | capacity = 26 Mbytes (fixed)<br>26 Mbytes (removeable) | ||
+ | | transfer rate = 1.25 Mbytes/sec | ||
+ | <!-- | minimum access time = --> | ||
+ | | average access time = 30.5-45.5 msec | ||
+ | <!-- | maximum access time = --> | ||
+ | | rpm = 2850 | ||
+ | | revolution time = 10.5 msec | ||
+ | <!-- | one track seek = msec --> | ||
+ | | average seek = 20-35 msec | ||
+ | | maximum seek = 55 msec | ||
+ | | media = 1 fixed<br>1 removeable | ||
+ | | surfaces = 4 (2 fixed, 2 removeable) | ||
+ | | number of heads = 4 | ||
+ | | tracks = 821 | ||
+ | | sectors = 31 | ||
+ | | bytes per sector = 512 | ||
+ | | tracks per inch = 1,000 | ||
+ | | density = 12,350 bits/inch | ||
+ | <!-- | recording method = [[Modified Frequency Modulation|MFM]] --> | ||
+ | | start time = 60 secs (max) | ||
+ | | stop time = 30 secs (max) | ||
+ | | physical size = 10.4" x 19.9" x 22.1" | ||
+ | | weight = 65 lbs (single drive) | ||
+ | | power consumption = 300 watts (idle) | ||
+ | }} | ||
− | {{stub}} | + | The '''RC25 disk drive''' was a combination [[non-removable-media disk]] and [[removable-pack disk]] (using a sealed [[pack]]) on a singled [[spindle]], from [[Digital Equipment Corporation|DEC]]. Each 8" [[platter]] had a capacity of 25 MB, for a total of 52 MB. It connected to the [[device controller]] via the DEC standard [[LESI]] [[bus]]; a second 'slave' drive can be connected to the first 'master' drive. It uses the [[Mass Storage Control Protocol]], and is member of the [[Digital Storage Architecture]]. |
+ | |||
+ | {{semi-stub}} | ||
==External links== | ==External links== |
Revision as of 21:24, 30 August 2023
RC25 | |
Manufacturer: | DEC |
---|---|
Drive Controller(s): | KLESI Low-End Storage Interconnect |
Capacity: | 26 Mbytes (fixed) 26 Mbytes (removeable) |
Transfer Rate: | 1.25 Mbytes/sec |
Average Access Time: | 30.5-45.5 msec |
Revolutions per Minute: | 2850 |
1/2 Revolution Time: | 10.5 msec |
Average Seek Time: | 20-35 msec |
Maximum Seek Time: | 55 msec |
Media: | 1 fixed 1 removeable |
Total Surfaces: | 4 (2 fixed, 2 removeable) |
Number of Heads: | 4 |
Tracks per Surface: | 821 |
Sectors per Track: | 31 |
Bytes per Sector: | 512 |
Tracks per Inch: | 1,000 |
Density: | 12,350 bits/inch |
Start Time: | 60 secs (max) |
Stop Time: | 30 secs (max) |
Physical Size: | 10.4" x 19.9" x 22.1" |
Weight: | 65 lbs (single drive) |
Power Consumption: | 300 watts (idle) |
The RC25 disk drive was a combination non-removable-media disk and removable-pack disk (using a sealed pack) on a singled spindle, from DEC. Each 8" platter had a capacity of 25 MB, for a total of 52 MB. It connected to the device controller via the DEC standard LESI bus; a second 'slave' drive can be connected to the first 'master' drive. It uses the Mass Storage Control Protocol, and is member of the Digital Storage Architecture.
External links
- rc25 - documentation at Bitsavers
- RC25 Disk Subsystem
- RC25 Disk Subsystem Pocket Service Guide (EK-0RC25-PS-002)