Difference between revisions of "Digital Storage Systems Interconnect"
(New section "DSSI Connectors" (draft)) |
(→DSSI Cabling: Add description of cabling) |
||
Line 99: | Line 99: | ||
* [[TF89]] | * [[TF89]] | ||
− | == DSSI Connectors == | + | == DSSI Cabling == |
+ | |||
+ | [[Image:DSSI_Connectors.png|thumb|250px|right|DSSI MR & PS Connectors]] | ||
+ | |||
+ | The [http://bitsavers.org/pdf/dec/dsa/dssi/EK-RF72D-UG-008_RF_Series_Integrated_Storage_Element_Users_Guide_Apr93.pdf "RF Series Integrated Storage Element User Guide"] (EK-RF72D-UG-008) says "The DSSI bus is a 50-conductor cable. Inside an enclosure, the bus may be a flat ribbon cable or a round bundle of twisted pairs. Between enclosures, the bus is a shielded round cable approximately ½-inch in diameter." | ||
+ | |||
+ | The short cables run from the [[printed circuit board|PCBs]] that implement the interfaces to a standard [[connector]] on the back of the enclosure. (Different enclosures use different short cables with a given board; see the "KFQSA Module Installation and User Manual", Section 2.1 for a partial list.) | ||
+ | |||
+ | === Connectors === | ||
There are (at least) four types of DSSI connectors: | There are (at least) four types of DSSI connectors: | ||
Line 110: | Line 118: | ||
* Single DSSI '''Device Connector''' 50-pin (SCSI-like) | * Single DSSI '''Device Connector''' 50-pin (SCSI-like) | ||
* Dual 3.5" / Single 5.25" DSSI '''Disk Interface Card Assembly''' e.g. for VAX 4000, BA430/BA440 | * Dual 3.5" / Single 5.25" DSSI '''Disk Interface Card Assembly''' e.g. for VAX 4000, BA430/BA440 | ||
− | |||
* [https://manx-docs.org/collections/mds-199909/cd2/cabinets/348abmg2.pdf BA430 BA440 Enclosure Maintenance.pdf] (EK-348AB-MG-002) | * [https://manx-docs.org/collections/mds-199909/cd2/cabinets/348abmg2.pdf BA430 BA440 Enclosure Maintenance.pdf] (EK-348AB-MG-002) | ||
Line 120: | Line 127: | ||
[[File:DSSI_Interface_Card_Assembly_Dual_RF35_Connector.jpg|thumb|DSSI Interface Card Assembly Dual RF35]] | [[File:DSSI_Interface_Card_Assembly_Dual_RF35_Connector.jpg|thumb|DSSI Interface Card Assembly Dual RF35]] | ||
[[File:DSSI_Device_Connector_RF30.jpg|thumb|DSSI Device Connector RF30]] | [[File:DSSI_Device_Connector_RF30.jpg|thumb|DSSI Device Connector RF30]] | ||
− | |||
[[File:DSSI_Interface_Card_Assembly.png|thumb|DSSI Interface Card Assembly (5.25" FH disk)]] | [[File:DSSI_Interface_Card_Assembly.png|thumb|DSSI Interface Card Assembly (5.25" FH disk)]] | ||
− | |||
{{semi-stub}} | {{semi-stub}} |
Revision as of 18:31, 4 September 2023
The Digital Storage Systems Interconnect (usually given as DSSI) is a mass storage bus from DEC. The DSSI specification lists the main attributes of DSSI as: 8-bit wide parallel; multi-drop linear bus electrical topology; low-cost, single-ended signalling interface circuitry; DC coupling.
It is an alternate physical layer in the Computer Interconnect system; the CI system had a 'native' physical layer before the creation of DSSI. The relationship between the DSSI and the CI's physical layer is shown in the following diagram:
<-----+ +---------------------+ | | Port Driver | | | Layer | | | ( SCA Specification)| | +---------------------+ | | | | | ....................... | . CI Port Adapter . | . ( eg: VAX CI Port ) . | ....................... | | | P +------> | | P | +---------------------+ | D | | CI Port | | C | | Layer | | L I | | ( DEC Std 161 ) | | A | +---------------------+ | Y A | | | | E R | +------+ +------+ | R C | | | | H | +----------------------+ +---------------------+ | I | | DSSI Datalink | | CI Datalink | | T | | Layer | .... | Layer | | E | | ( DSSI Spec. ) | | ( Dec Std 161 ) | | C | +----------------------+ +---------------------+ | T | | | <-----+ U | | | <-----+ P L R | +----------------------+ +---------------------+ | H A E | | DSSI Physical | | CI Physical | | Y Y | | Interconnect | | Interconnect | | S E | | ( DSSI Spec. ) | | ( DEC Std 161 ) | | I R | +----------------------+ +---------------------+ | C +------> <-----+ A L Figure 1-2: CI PPD Architectural Layers
DSSI thus made it possible to build VAXclusters from MicroVAX and smaller VAX computers, by adding CI-bus functionality to smaller VAX systems. It can also be used to create loosely-coupled multi-processors, by sharing a number of disk drives between two systems. Such shared drives are termed 'Integrated Storage Elements' (ISEs).
A description of the DSSI from the 'Digital's Storage System Interconnect' protocol specification document:
"The DSSI, supporting the needs of low-end and mid-range systems, is one in a family of high-performance computer-to-computer interconnects .. that combine a common host interface and port layer with an implementation-specific datalink and physical interconnect. CI-class interconnects provide the transmission services required by Digital's System Communication Architecture (SCA) - a four-tiered set of protocols and interfaces.."
Contents
DSSI Controllers/Interfaces
- KFQSA QBUS DSSI Adapter
- KFMSA XMI Dual DSSI Adapter
- KFMSB XMI DSSI adapter
- KFESA EISA DSSI Adapter
- KFESB EISA DSSI Adapter
- KFPSA PCI DSSI Adapter
- KFE52 VAXft Multi-Function Interface
- KDXDA VAXft 810 DSSI Interface
- EDA640 MicroVAX 3300/3400 KA640 embedded DSSI Adapter (EDA)
- KFA40 DEC 4000 I/O Module
DSSI Hierarchical Storage Controllers (HSDs)
Hierarchical Storage Controllers:
DSSI Disk Drives
DSSI Tape Drives
DSSI Cabling
The "RF Series Integrated Storage Element User Guide" (EK-RF72D-UG-008) says "The DSSI bus is a 50-conductor cable. Inside an enclosure, the bus may be a flat ribbon cable or a round bundle of twisted pairs. Between enclosures, the bus is a shielded round cable approximately ½-inch in diameter."
The short cables run from the PCBs that implement the interfaces to a standard connector on the back of the enclosure. (Different enclosures use different short cables with a given board; see the "KFQSA Module Installation and User Manual", Section 2.1 for a partial list.)
Connectors
There are (at least) four types of DSSI connectors:
Two DSSI cable connectors:
- MR (midrange or micro ribbon) connector = "50 Way High Density Micro Ribbon"
- PS (pedestal style or pin socket) connector = "50 Way High Density Honda"
Two DSSI device connectors:
- Single DSSI Device Connector 50-pin (SCSI-like)
- Dual 3.5" / Single 5.25" DSSI Disk Interface Card Assembly e.g. for VAX 4000, BA430/BA440
- BA430 BA440 Enclosure Maintenance.pdf (EK-348AB-MG-002)
- DSSI VMScluster Installation and Troubleshooting Guide (EK-410AB-MG.D01)
External Links
- DSSI - DSSI and related documents at Bitsavers
- Digital's Storage System Interconnect - protocol specification document
- MicroVAX Dual-Host Systems (EK-338AC-DH-003) - contains a clear description of how a DSSI can be used to create a loosely-couple multi-processor
- RF Series Integrated Storage Element User Guide (EK-RF72D-UG-008)