Difference between revisions of "CTI BUS"
From Computer History Wiki
(Seems to be a variant form of the QBUS) |
m (Some CTI BUS Interfaces added) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
The '''CTI BUS''' (Computing Terminal Interconnect Bus) was developed for and used on the [[Professional 300 Series]] of [[Digital Equipment Corporation|DEC]] [[PDP-11]] personal computers solely. It seems to be a variant form of a [[QBUS]], with some additional [[signal]]s, carried on a [[connector]] with a different physical form factor (a 90-pin zero-insertion-force connector, of which the first 60 pins are used for the CTI BUS). | The '''CTI BUS''' (Computing Terminal Interconnect Bus) was developed for and used on the [[Professional 300 Series]] of [[Digital Equipment Corporation|DEC]] [[PDP-11]] personal computers solely. It seems to be a variant form of a [[QBUS]], with some additional [[signal]]s, carried on a [[connector]] with a different physical form factor (a 90-pin zero-insertion-force connector, of which the first 60 pins are used for the CTI BUS). | ||
| + | |||
| + | In most cases, the bus will allow option modules to be placed in any available option slot. Each option module can generate two different hardware interrupt signals. When an option is in place, an option-present signal is asserted. Each option contains onboard ROM with identification information. | ||
| + | |||
| + | == CTI BUS Interfaces == | ||
| + | |||
| + | * [[DECNA]] - CTI Ethernet Network Adapter | ||
| + | * [[DLC11]] - CTI Serial Interface | ||
| + | * [[DRC11]] - CTI Parallel Interface | ||
| + | * [[DTC11]] - CTI Telephone Management System Interface | ||
{{semi-stub}} | {{semi-stub}} | ||
Latest revision as of 21:00, 15 October 2024
The CTI BUS (Computing Terminal Interconnect Bus) was developed for and used on the Professional 300 Series of DEC PDP-11 personal computers solely. It seems to be a variant form of a QBUS, with some additional signals, carried on a connector with a different physical form factor (a 90-pin zero-insertion-force connector, of which the first 60 pins are used for the CTI BUS).
In most cases, the bus will allow option modules to be placed in any available option slot. Each option module can generate two different hardware interrupt signals. When an option is in place, an option-present signal is asserted. Each option contains onboard ROM with identification information.
CTI BUS Interfaces
- DECNA - CTI Ethernet Network Adapter
- DLC11 - CTI Serial Interface
- DRC11 - CTI Parallel Interface
- DTC11 - CTI Telephone Management System Interface
External links
- Professional 300 Series Technical Manual (EK-PC350-TM-001) - see Sections 5.3.3, "Buses", and 7.2.1.1, "CTI BUS Interface Circuits"
