Difference between revisions of "Baud rate"

From Computer History Wiki
Jump to: navigation, search
(A start...)
 
m (+cat)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
In [[data communication]], '''baud rate''' (sometimes called ''''symbol rate''') is the speed at which basic symbols are transferred across a [[communication link]].
+
In [[data communication]], '''baud rate''' (sometimes called '''symbol rate''') is the speed at which basic symbols are transferred across a [[communication link]].
  
If the symbols used on the link have only two values (i.e. they are [[bit]]s), then the baud rate and the bit rate are identical. However, some system use more complex signalling, and each symbol might have 4 potential values, in which case there would be 2 bits per symbol, and the bit rate would be twice the baud rate.
+
If the symbols used on the link have only two values (i.e. they are [[bit]]s), then the baud rate and the bit rate are identical. However, some system use more complex signalling, and each symbol might have, for example, 4 potential values, in which case there would be 2 bits per symbol, and the bit rate would be twice the baud rate.
  
 
Most slower-speed [[serial line]]s, there is only one bit per symbol, but in higher-speed links, multi-bit symbols are common.
 
Most slower-speed [[serial line]]s, there is only one bit per symbol, but in higher-speed links, multi-bit symbols are common.
  
{{stub}}
+
{{semi-stub}}
 +
 
 +
[[Category: Communication Basics]]

Latest revision as of 19:55, 13 December 2018

In data communication, baud rate (sometimes called symbol rate) is the speed at which basic symbols are transferred across a communication link.

If the symbols used on the link have only two values (i.e. they are bits), then the baud rate and the bit rate are identical. However, some system use more complex signalling, and each symbol might have, for example, 4 potential values, in which case there would be 2 bits per symbol, and the bit rate would be twice the baud rate.

Most slower-speed serial lines, there is only one bit per symbol, but in higher-speed links, multi-bit symbols are common.