Difference between revisions of "RH10 MASSBUS controller"

From Computer History Wiki
Jump to: navigation, search
(A bit stubby, but an OK start)
 
m (External links: +KL10-Based Physical Description)
 
(6 intermediate revisions by 2 users not shown)
Line 1: Line 1:
An '''RH10 MASSBUS controller''' is a [[secondary storage]] [[device controller]] for the [[PDP-10]], primarily for the early models ([[KA10]] and [[KI10]]) which had the PDP-10 [[input/output|I/O]] [[bus]] as a standard bus.
+
An '''RH10 MASSBUS controller''' is a [[secondary storage]] [[device controller]] for the [[PDP-10]], primarily for the early models ([[KA10]] and [[KI10]]) which had the [[PDP-10 I/O Bus]] as a standard bus. It is always paired with a [[DF10 Data Channel]] unit which performs [[Direct Memory Access|DMA]] to [[main memory]].
  
It works with the [[MASSBUS]] [[disk]] [[drive]]s and [[magnetic tape drive]]s; up to 8 drives per RH10. It uses a [[DF10 Data Channel]] unit to perform [[Direct Memory Access|DMA]] to [[main memory]].
+
It works with [[MASSBUS]] [[disk]] [[drive]]s and [[magnetic tape drive]]s (such as the [[RP04 disk drive|RP04]], etc, series drives); up to 8 drives per RH10.  
  
 
{{semi-stub}}
 
{{semi-stub}}
  
[[Category: DEC Storage Controllers]]
+
==See also==
 +
 
 +
* [[RH20 MASSBUS controller]]
 +
* [[RP10 disk controller‎]]
 +
 
 +
==External links==
 +
 
 +
* [http://bitsavers.org/pdf/dec/pdp10/periph/EK-RH10-MM-002_RH10_Massbus_Controller_Maintenance_Manual_Jun75.pdf RH10 Massbus Controller Maintenance Manual]
 +
* [http://www.bitsavers.org/pdf/dec/pdp10/KL10/EK-108OU-PD-002_KL10-Based_Physical_Description_Mar77.pdf KL10-Based Physical Description] (EK-108OU-PD-002) - the RH10 is covered on pg. 38 of the PDF
 +
 
 +
[[Category: PDP-10 Peripherals]]
 +
[[Category: MASSBUS Controllers]]

Latest revision as of 12:05, 12 November 2023

An RH10 MASSBUS controller is a secondary storage device controller for the PDP-10, primarily for the early models (KA10 and KI10) which had the PDP-10 I/O Bus as a standard bus. It is always paired with a DF10 Data Channel unit which performs DMA to main memory.

It works with MASSBUS disk drives and magnetic tape drives (such as the RP04, etc, series drives); up to 8 drives per RH10.

See also

External links