Difference between revisions of "RC25 disk drive"
From Computer History Wiki
					
										
					
					m (Have the more-specific cat)  | 
				m (→External links:  brochure)  | 
				||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | + | {{Infobox Disk drive  | |
| + | | name = RC25  | ||
| + | | manufacturer = [[Digital Equipment Corporation|DEC]]  | ||
| + | <!-- | year introduced =   | ||
| + | | year discontinued = -->  | ||
| + | | controller = [[KLESI Low-End Storage Interconnect]]  | ||
| + | | capacity = 26 Mbytes (fixed)<br>26 Mbytes (removeable)  | ||
| + | | transfer rate = 1.25 Mbytes/sec  | ||
| + | <!-- | minimum access time = -->  | ||
| + | | average access time = 30.5-45.5 msec  | ||
| + | <!-- | maximum access time = -->  | ||
| + | | rpm = 2850  | ||
| + | | revolution time = 10.5 msec  | ||
| + | <!-- | one track seek =  msec -->  | ||
| + | | average seek = 20-35 msec  | ||
| + | | maximum seek = 55 msec  | ||
| + | | media = 1 fixed<br>1 removeable  | ||
| + | | surfaces = 4 (2 fixed, 2 removeable)  | ||
| + | | number of heads = 4  | ||
| + | | tracks = 821  | ||
| + | | sectors = 31  | ||
| + | | bytes per sector = 512  | ||
| + | | tracks per inch = 1,000  | ||
| + | | density = 12,350 bits/inch  | ||
| + | <!-- | recording method = [[Modified Frequency Modulation|MFM]] -->  | ||
| + | | start time = 60 secs (max)  | ||
| + | | stop time = 30 secs (max)  | ||
| + | | physical size = 10.4" x 19.9" x 22.1"  | ||
| + | | weight = 65 lbs (single drive)  | ||
| + | | power consumption = 300 watts (idle)  | ||
| + | }}  | ||
| − | {{stub}}  | + | The '''RC25 disk drive''' was a combination [[non-removable-media disk]] and [[removable-pack disk]] (using a sealed [[pack]]) on a singled [[spindle]], from [[Digital Equipment Corporation|DEC]]. Each 8" [[platter]] had a capacity of 26 MB, for a total of 52 MB. It connected to the [[device controller]] via the DEC standard [[Low End System Interconnect]] [[bus]]; a second 'slave' drive can be connected to the first 'master' drive. It uses the [[Mass Storage Control Protocol]], and is member of the [[Digital Storage Architecture]].  | 
| + | |||
| + | {{semi-stub}}  | ||
==External links==  | ==External links==  | ||
* [http://bitsavers.org/pdf/dec/disc/rc25/ rc25] - documentation at [[Bitsavers]]  | * [http://bitsavers.org/pdf/dec/disc/rc25/ rc25] - documentation at [[Bitsavers]]  | ||
| − | * [http://bitsavers.org/pdf/dec/brochures/DEC-RS25-DiskSubsystem.pdf RC25 Disk Subsystem]  | + | * [http://bitsavers.org/pdf/dec/brochures/DEC-RS25-DiskSubsystem.pdf RC25 Disk Subsystem] - brochure  | 
* [https://manx-docs.org/collections/antonio/dec/ek-0rc25-ps-002.pdf RC25 Disk Subsystem Pocket Service Guide] (EK-0RC25-PS-002)  | * [https://manx-docs.org/collections/antonio/dec/ek-0rc25-ps-002.pdf RC25 Disk Subsystem Pocket Service Guide] (EK-0RC25-PS-002)  | ||
Latest revision as of 18:22, 23 April 2024
| RC25 | |
| Manufacturer: | DEC | 
|---|---|
| Drive Controller(s): | KLESI Low-End Storage Interconnect | 
| Capacity: |  26 Mbytes (fixed) 26 Mbytes (removeable)  | 
| Transfer Rate: | 1.25 Mbytes/sec | 
| Average Access Time: | 30.5-45.5 msec | 
| Revolutions per Minute: | 2850 | 
| 1/2 Revolution Time: | 10.5 msec | 
| Average Seek Time: | 20-35 msec | 
| Maximum Seek Time: | 55 msec | 
| Media: |  1 fixed 1 removeable  | 
| Total Surfaces: | 4 (2 fixed, 2 removeable) | 
| Number of Heads: | 4 | 
| Tracks per Surface: | 821 | 
| Sectors per Track: | 31 | 
| Bytes per Sector: | 512 | 
| Tracks per Inch: | 1,000 | 
| Density: | 12,350 bits/inch | 
| Start Time: | 60 secs (max) | 
| Stop Time: | 30 secs (max) | 
| Physical Size: | 10.4" x 19.9" x 22.1" | 
| Weight: | 65 lbs (single drive) | 
| Power Consumption: | 300 watts (idle) | 
The RC25 disk drive was a combination non-removable-media disk and removable-pack disk (using a sealed pack) on a singled spindle, from DEC. Each 8" platter had a capacity of 26 MB, for a total of 52 MB. It connected to the device controller via the DEC standard Low End System Interconnect bus; a second 'slave' drive can be connected to the first 'master' drive. It uses the Mass Storage Control Protocol, and is member of the Digital Storage Architecture.
External links
- rc25 - documentation at Bitsavers
 - RC25 Disk Subsystem - brochure
 - RC25 Disk Subsystem Pocket Service Guide (EK-0RC25-PS-002)