Difference between revisions of "Bridge"

From Computer History Wiki
Jump to: navigation, search
(I'm not sure this is right.)
 
(Expand description somewhat)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
A '''bridge''' is a type of [[packet switch]] which joins two otherwise physically separate networks. The bridge operates mostly invisibly and need not have its own address in the network.
+
A '''bridge''' is a type of [[packet switch]] which is fundamentally different from a [[router]]. It effectively unifies two otherwise separate [[physical network]]s; a [[host]] sending a [[packet]] cannot tell whether the destination [[network interface]] is on the same physical network as it is, or on another one, which is connected to its physical network through a bridge. The two physical networks must thus share a unified [[address space]].
  
{{stub}}
+
The bridge thus operates on the [[protocol stack]] layer beneath the [[internetworking layer]]; bridges usually have no knowledge of that layer.  A bridge operates mostly invisibly, and do not have its own address on the physical networks (although it may have one for
 +
[[operation and maintenance]] purposes).
 +
 
 +
A bridge thus needs no configuration; one merely plugs it in, and as soon as it is powered on, it starts to operate. (Hence the saying that "The advantage of a bridge is that it looks like a wire, but it isn't. The ''disadvantage'' of a bridge is that it looks like a wire, but it isn't.")
 +
 
 +
{{semi-stub}}
 +
 
 +
[[Category: Networking Basics]]

Latest revision as of 04:32, 16 October 2023

A bridge is a type of packet switch which is fundamentally different from a router. It effectively unifies two otherwise separate physical networks; a host sending a packet cannot tell whether the destination network interface is on the same physical network as it is, or on another one, which is connected to its physical network through a bridge. The two physical networks must thus share a unified address space.

The bridge thus operates on the protocol stack layer beneath the internetworking layer; bridges usually have no knowledge of that layer. A bridge operates mostly invisibly, and do not have its own address on the physical networks (although it may have one for operation and maintenance purposes).

A bridge thus needs no configuration; one merely plugs it in, and as soon as it is powered on, it starts to operate. (Hence the saying that "The advantage of a bridge is that it looks like a wire, but it isn't. The disadvantage of a bridge is that it looks like a wire, but it isn't.")