Difference between revisions of "IAS computer"

Latest revision as of 15:10, 29 August 2024

The IAS computer (sometimes called the IAS machine; it seems not to have had a formal name, although some later contemporary documents call it 'MANIAC', a name used by the Los Alamos copy) was a very early electronic programmable computer. The group that designed and built it began the task in June, 1946, initial operation began in the fall of 1950, and it was formally dedicated on 10 June, 1952. Its most significant contribution was the vast list of first-generation computers, both in the US, and around the world, which were copies of it (below).

The group, the Electronic Computer Project (ECP), was assembled by John von Neumann at the Institute for Advanced Study (IAS) at Princeton (von Neumann's base institution at the time). This machine became his focus after his involvement in the planning for, and design of, the EDVAC had enlightened him to the promise of the field. (He broke off his connection to John Mauchly, and especially J. Presper Eckert, because they were focused on starting a business, the eventual Eckert–Mauchly Computer Corporation, and he wished to make all his work public - as the many copies of the IAS computer testified.)

The engineers on the ECP team initially included Julian Bigelow (Chief Engineer; replaced mid-way with initial team-member James Pomerene), John Davis, Robert Shaw, Ralph Slutz, and Willis Ware; Morris Rubinoff and Richard Snyder joined later. Other members of the team included Arthur Burks, Jule Charney, Hewitt Crane, N. Emslie, Gerald Estrin, E. Frei, Herman Goldstine, T. Hildebrandt, G. Kent, W. Melville, J. Rosenberg, Morris Rubinoff, Richard L. Snyder, and others. Their work was widely distributed via progress reports, which were circulated extensively. The IAS closed the ECP in 1957-58 (the exact date is uncertain); apparently because as an organization the IAS was uncomfortable with such an essentially practical effort. The personnel then scattered, taking their knowledge with them; many became leading lights on other early computers.

Technical details

Not one of the many, many later books which describe the IAS machine (below) give complete coverage of its architecture. This description is mostly gleaned from the Final Progress Report (below); the instruction set is enumerated at the end of that, and is given below.

It eventually used 40 Williams tubes for its main memory (after the Selectron project failed to produce usable memory, although a later copy used them). They contained 1K words in total, each tube using a 32x32 array. (Although this memory had to be refreshed, refresh cycles could be combined with read/write operations when possible.) The logic was constructed using vacuum tubes (although only about 3,000; many fewer than the ENIAC).

It was an asynchronous parallel computer internally, using 40-bit words. It used binary, with the sign bit at the left (and two's complement), and the binary point between it and the next bit; i.e. words can represent values between 1 and -1.

The machine included 3 registers, each 40 bits long:

RI (also given as R₁ in documentation) - the Accumulator; one input to the adder, receives the output from the adder
RII (also R₂) - the Arithmetic Register; used in multiplication and division
RIII (also R₃) - the Memory Register; the other input (possibly complemented, or zeroed) to the adder

Each register is composed internally of a pair of 'sub-registers' (termed "ranks"), denoted as R_n (the "permanent rank") and Rⁿ (the "temporary rank") in contemporary documentation. RI and RII can perform single-bit left and right shifts when copying data from the Rⁿ rank to R_n; an un-shifted copy can take place from R_n to Rⁿ. RIII can also be copied to RII, and RII to RI.

Instructions were 20 bits long, and contained a 10-bit opcode and a 10-bit address. There were about 30 in total; the number changed over time (e.g. when the I/O system was first redone, in 1952).

It had instructions to perform multiplication and division, but no special hardware; both were performed a bit at a time, with shifting (performed with the sub-registers described above) and addition/subtraction. (Throughout the contemporary documentation, a great amount of attention is paid to the details of the arithmetic - as one might expect of a design in which John von Neumann was involved!)

I/O was on paper tape initially, later (1952) switched to punched cards, and supplemented with a 7" CRT for graphics output. It was eventually (June, 1953) given an IAS-built drum of 2K words; a 12K one from ERA was later (1955) installed.

Instruction set

Two instructions were stored in each word, referred to as the 'first' (left) and 'second' (right) 'phases'; executed in that order. A few instructions could be executed in the left phase only, and one in the right only; such limitations are given in the table below (a blank entry means 'either').

The 'step digit', bit 11, may be 0 (halt after executing the instruction) or 1 in many instructions. If so, it is indicated by an 'S' in 'bits' column (and also in the numeric opcode). "S=1" means it must be set in that instruction. The 'clear digit', bit 18, is available in some instructions; if so, it is indicated by a 'C' in the 'bits' column (and will set the appropriate bit in the numeric opcode). It may be 0 (see 'Comment' for action) or 1 (clear R1 before commencing).

Potential operands are generally R₁, R₂, and R³ (referred to as "R3" in the table); and the contents ('b') of the memory location (address 'x'). Most instruction (unless otherwise noted) leave b in R3. A detailed description of each instruction is provided on the given page of the Final Progress Report.

Group	Opcode	Name	Page	Bits	Phase	Brief description	Comment
Summation	S712	Plus clear	22	S		Load b into R1
	S710	Plus hold	23	S		Add b to R1
	S732	Minus clear	24	S		Load 2-b into R1
	S730	Minus hold	24	S		Subtract b from R1
	S752	Plus absolute clear	25	S		Load abs(b) into R1
	S750	Plus absolute hold	25	S		Add abs(b) to R1
	S772	Minus absolute clear	26	S		Load 2-abs(b) into R1
	S770	Minus absolute hold	26	S		Subtract b from R1	It is not clear if/how this differs from 'Minus hold'
Other	S702/700	Multiply no round off	27	SC		Multiply R2 and b; high order result to R1, low order to R2	If C=0, add the old contents of R1 to the product
	S706/704	Multiply round off	28	SC		As previous	Ditto
	S760	Division	28	S		Divide R1 by b; leaves result in R2, twice the remainder in R1
	S714	Load RII	29	SC		Load R2
Trivial	1650	Store	30	S=1		Store R1; clear R3
	1652	Store clear	30	S=1		Clear R1, R3, and memory
	S640	Un-conditional transfer	31			Next instruction will be from 'b' (opposite phase from this one, if step bit is set); clear R3	b is stored in R₃
	S660	Conditional transfer	32			If R1 >= 0, then as above; if < 0, a no-op
Special	1711-1773	Quick sum	33	S=1	first	See entry in Final Progress Report
Non-memory	S500	Right shift, no round off	34	SC		Shift R1/R2 double-width register right N bits, always retaining sign bit in R1; copy old contents of R2 to R3	N is given in bits 4-9, and must be > 0 and < 47; if C=0, no effect, if C=1 clear R1 before shift
	S504	Right shift, round off	35	SC		Not implemented
	S520	Left shift	35	SC		Shift R1 and R2 independently left N bits, with the sign bit of R1 copied into the low bit of both; copy old contents of R2 to R3	As for 'right shift, no round off'; but if C=1, R1 is cleared after shift, and the sign bit of R1 is cleared before being copied to R2
	S510-S572	R_{2 to R₁}	36	S		Same as 'Summation' group, but the operand is in R2, not memory
Input-output	1200-1376	IBM and drum priming	37	S	second	See entry in Final Progress Report	S is only recommended
	1010	IBM input to memory	39	S=1	first	Ditto; the second instruction in the word must be a jump to the next instruction
	1116	IBM output to [sic] memory	39	S=1	first	Ditto
	1210-1230	Drum input to memory	39	S=1	first	Ditto
	1316-1336	Drum output from memory	40	S=1	first	Ditto

NOTE: the document uses "digit" where we would now say 'bit'.

The operation codes are given in a table in the Final Progress Report, but not in numeric form; and the column for each bit in the opcode has an individual name, not a number. It is not known if the columns are in numeric order; if they are, the step bit is in the bit number indicated elsewhere in the document (11), but the clear digit bit is not (it is given elsewhere as bit 18, but is 19 in the table). The opcodes are given above in octal, as if the bit columns in the Final Progress Report are in numeric order. The bit columns (numbered by apparent value, based on position) are labelled:

Bit	'0' Value	'1' Value
11	No step	Step
12	Ext.	Int.
13	Arith.	Wms.
14	AT	NAT
15	#	Abs.
16	+R	-L
17	x/÷	∑
18	No RO	RO
19	Hold	Clear
20	Spare

Copies

As mentioned, many copies of it were built, early on (and a few later), some with the help of people who had worked on the IAS machine. The faithfulness of the copies varied from machine to machine (apparently including a last one, built with transistors); the later ones used core memory. The list of the US ones, with their dates of completion, is:

AVIDAC(Argonne) - January, 1953
CYCLONE (Iowa State University) - July, 1959
ILLIAC (Illinois) - September, 1952
JOHNNIAC (Rand) - March, 1954
MANIAC (Los Alamos) - March, 1952 (slightly before the original)
MISTIC (Michigan State University) - November, 1957 (a copy of the ILLIAC)
ORACLE (Oak Ridge) - September, 1953
ORDVAC (Aberdeen) - November, 1951

(The MANIAC was said to have been so named in protest against the 'cute' names which had become the fashion.) Elsewhere, they included:

BESK (Royal Institute of Technology, Sweden) - November, 1953 (included hardware floating point)
DASK (Academy of Technical Sciences, Denmark) - 1957 (a copy of BESK)
EDB-1 (Facit, Sweden) - 1957 (another copy of BESK, without floating point)
MUSASINO-1 (NTT, Japan) - March, 1957
SARA (SAAB, Sweden) - 1957 (another tweaked copy of BESK)
SILLIAC (University of Sydney, Australia) - June, 1956
SMIL (Lund University, Sweden) - June, 1956
TRASK (Datasystem AB, Sweden) - 1965 (another copy of BESK, using transistors and core)
WEIZAC (Weizmann Institute, Israel) - October, 1955

The IBM 701 was apparently a 'cleaned up' copy as well (a different word length, with half-word addresses), as were the EDB-2 and EDB-3 families built in Sweden from 1957 on, and the FACOM 201 (a copy of the MUSASINO-1) produced by Fujitsu from 1960.

Several other machines (such as the BESM 1) were built after close study of the IAS computer's documentation (and in the BESM 1's case, that of the BESK as well), but were not copies of it.

This article is not as complete coverage of the topic as it could be. You can help by expanding it.

External links

IAS - documentation at Bitsavers (skimpy)
- Final Progress Report on the Physical Realization of an Electronic Computing Instrument - contains a lot of details on the mathematics, and a detailed list of instructions
John Deane, The IAS Computer Family Scrapbook - lists further information sources for each machine
Electronic Computer Project

@@ Line 1: / Line 1: @@
-The '''IAS computer''' (sometimes called the '''IAS machine'''; it seems not to have had a formal name) was a very early [[electronic]] [[program]]mable [[computer]]. The group that designed and built it began the task in June, 1946, and it passed its initial acceptance test in June, 1952. Its most significant contribution was the vast list of first-generation computers, both in the US, and around the world, which were copies of it (below).
+The '''IAS computer''' (sometimes called the '''IAS machine'''; it seems not to have had a formal name, although some later contemporary documents call it 'MANIAC', a name used by the Los Alamos copy) was a very early [[electronic]] [[program]]mable [[computer]]. The group that designed and built it began the task in June, 1946, initial operation began in the fall of 1950, and it was formally dedicated on 10 June, 1952. Its most significant contribution was the vast list of first-generation computers, both in the US, and around the world, which were copies of it (below).
-The group, the '''Electronic Computer Project''' (ECP), was assembled by [[John von Neumann]] at the [[Institute for Avanced Study]] (IAS) at Princeton (von Neumann's base institution at the time). This machine became his focus after his involvement in the planning for, and design of, the [[EDVAC]] had enlightened him to the promise of the field. (He broke off his connection to [[John Mauchly]], and especially [[J. Presper Eckert]], because they were focused on starting a business, the eventual [[Eckert–Mauchly Computer Corporation]], and he wished to make all his work public - as the many copies of the IAS computer testified.)
+The group, the '''Electronic Computer Project''' (ECP), was assembled by [[John von Neumann]] at the [[Institute for Advanced Study]] (IAS) at Princeton (von Neumann's base institution at the time). This machine became his focus after his involvement in the planning for, and design of, the [[EDVAC]] had enlightened him to the promise of the field. (He broke off his connection to [[John Mauchly]], and especially [[J. Presper Eckert]], because they were focused on starting a business, the eventual [[Eckert–Mauchly Computer Corporation]], and he wished to make all his work public - as the many copies of the IAS computer testified.)
-The engineers on the ECP team initially included Julian Bigelow (Chief Engineer; replaced mid-way with initial team-member James Pomerene), John Davis, Robert Shaw, Ralph Slutz, and Willis Ware; Morris Rubinoff and Dick Snyder joined later. Other members of the team included Arthur Burks, Jule Charney, Hewitt Crane, Gerald Estrin, Herman Goldstine, and others. Their work was widely distributed via progress reports, which were circulated extensively. The IAS closed the ECP in 1957-58 (the exact date is uncertain); apparently because as an organization it was uncomfortable with such an essentially practical effort. The personnel then scattered, taking their knowledge with them; many became leading lights on other early computers.
+The engineers on the ECP team initially included Julian Bigelow (Chief Engineer; replaced mid-way with initial team-member James Pomerene), John Davis, Robert Shaw, Ralph Slutz, and Willis Ware; Morris Rubinoff and Richard Snyder joined later. Other members of the team included Arthur Burks, Jule Charney, Hewitt Crane, N. Emslie, Gerald Estrin, E. Frei, Herman Goldstine, T. Hildebrandt, G. Kent, W. Melville, J. Rosenberg, Morris Rubinoff, Richard L. Snyder, and others. Their work was widely distributed via progress reports, which were circulated extensively. The IAS closed the ECP in 1957-58 (the exact date is uncertain); apparently because as an organization the IAS was uncomfortable with such an essentially practical effort. The personnel then scattered, taking their knowledge with them; many became leading lights on other early computers.
-It eventually used [[Williams tube]]s for its [[main memory]] (after the [[Selectron]] project failed to produce usable memory), 1K 40-[[bit]] [[word]]s in total. It was constructed using [[vacuum tube]]s (although only about 3,000; many fewer than the [[ENIAC]]), and was a [[asynchronous]] [[parallel computer]] internally, using [[binary]].
+==Technical details==
-[[Instruction]]s were 20 bits long, and contained a 10-bit [[operation code|opcode]] and a 10-bit [[address]]. There were 16 instruction classes, each with 16 variants, not all of which did something useful. It had instructions to perform multiplication and division, but no special hardware; both were performed a bit at a time, with shifting and addition/subtraction.
+Not one of the many, many later books which describe the IAS machine (below) give complete coverage of its [[architecture]]. This description is mostly gleaned from the ''Final Progress Report'' (below); the [[instruction set]] is enumerated at the end of that, and is given below.
-It was eventually given a [[drum]] of 2K words; there was a plan to replace that with a 12K one. [[Input/output|I/O]] was on [[paper tape]] initially, later switched to [[punched card]]s, and supplemented with a 7" [[CRT]] for [[graphics]] output.
+It eventually used 40 [[Williams tube]]s for its [[main memory]] (after the [[Selectron]] project failed to produce usable memory, although a later copy used them). They contained 1K words in total, each tube using a 32x32 [[array]]. (Although this memory had to be [[memory refresh|refreshed]], refresh cycles could be combined with read/write operations when possible.) The [[logic]] was constructed using [[vacuum tube]]s (although only about 3,000; many fewer than the [[ENIAC]]).
+It was an [[asynchronous]] [[parallel computer]] internally, using 40-[[bit]] [[word]]s. It used [[binary]], with the sign bit at the left (and [[two's complement]]), and the binary point between it and the next bit; i.e. words can represent values between 1 and -1.
+The machine included 3 [[register]]s, each 40 bits long:
+* RI (also given as R<sub>1</sub> in documentation) - the Accumulator; one input to the [[adder]], receives the output from the adder
+* RII (also R<sub>2</sub>) - the Arithmetic Register; used in multiplication and division
+* RIII (also R<sub>3</sub>) - the Memory Register; the other input (possibly complemented, or zeroed) to the adder
+Each register is composed internally of a pair of 'sub-registers' (termed "ranks"), denoted as R<sub>n</sub> (the "permanent rank") and R<sup>n</sup> (the "temporary rank") in contemporary documentation. RI and RII can perform single-bit left and right shifts when copying data from the R<sup>n</sup> rank to R<sub>n</sub>; an un-shifted copy can take place from R<sub>n</sub> to R<sup>n</sup>. RIII can also be copied to RII, and RII to RI.
+[[Instruction]]s were 20 bits long, and contained a 10-bit [[operation code|opcode]] and a 10-bit [[address]]. <!-- There were 16 instruction classes, each with some variants, not all of which did something useful. (For instance, the 'load RII' instruction could optionally clear RI.) --> There were about 30 in total; the number changed over time (e.g. when the [[input/output|I/O]] system was first redone, in 1952).
+It had instructions to perform multiplication and division, but no special hardware; both were performed a bit at a time, with shifting (performed with the sub-registers described above) and addition/subtraction. (Throughout the contemporary documentation, a great amount of attention is paid to the details of the arithmetic - as one might expect of a design in which John von Neumann was involved!)
+I/O was on [[paper tape]] initially, later (1952) switched to [[punched card]]s, and supplemented with a 7" [[CRT]] for [[graphics]] output. It was eventually (June, 1953) given an IAS-built [[drum]] of 2K words; a 12K one from [[Engineering Research Associates|ERA]] was later (1955) installed.
+===Instruction set===
+Two instructions were stored in each word, referred to as the 'first' (left) and 'second' (right) 'phases'; executed in that order. A few instructions could be executed in the left phase only, and one in the right only; such limitations are given in the table below (a blank entry means 'either').
+The 'step digit', bit 11, may be 0 ([[halt]] after executing the instruction) or 1 in many instructions. If so, it is indicated by an 'S' in 'bits' column (and also in the numeric opcode). "S=1" means it ''must'' be set in that instruction. The 'clear digit', bit 18, is available in some instructions; if so, it is indicated by a 'C' in the 'bits' column (and will set the appropriate bit in the numeric opcode). It may be 0 (see 'Comment' for action) or 1 (clear R1 before commencing).
+Potential [[operand]]s are generally R<sub>1</sub>, R<sub>2</sub>, and R<sup>3</sup> (referred to as "R3" in the table); and the contents ('b') of the memory location (address 'x'). Most instruction (unless otherwise noted) leave b in R3. A detailed description of each instruction is provided on the given page of the ''Final Progress Report''.
+{| class="wikitable"
+! Group !! Opcode !! Name !! Page !! Bits !! Phase !! Brief description !! Comment
+|-
+| rowspan="8" | {{VerticalTextUp|Summation}} || S712 || Plus clear || 22 || S || &nbsp; || Load b into R1
+|-
+| S710 || Plus hold || 23 || S || &nbsp; || Add b to R1
+|-
+| S732 || Minus clear || 24 || S || &nbsp; || Load 2-b into R1
+|-
+| S730 || Minus hold || 24 || S || &nbsp; || Subtract b from R1
+|-
+| S752 || Plus absolute clear || 25 || S || &nbsp; || Load abs(b) into R1
+|-
+| S750 || Plus absolute hold || 25 || S || &nbsp; || Add abs(b) to R1
+|-
+| S772 || Minus absolute clear || 26 || S || &nbsp; || Load 2-abs(b) into R1
+|-
+| S770 || Minus absolute hold || 26 || S || &nbsp; || Subtract b from R1 || It is not clear if/how this differs from 'Minus hold'
+|-
+| rowspan="4" | {{VerticalTextUp|Other}} || S702/700 || Multiply no round off || 27 || SC || &nbsp; || Multiply R2 and b; high order result to R1, low order to R2 || If C=0, add the old contents of R1 to the product
+|-
+| S706/704 || Multiply round off || 28 || SC || &nbsp; || As previous || Ditto
+|-
+| S760 || Division || 28 || S || &nbsp; || Divide R1 by b; leaves result in R2, twice the remainder in R1
+|-
+| S714 || Load RII || 29 || SC || &nbsp; || Load R2
+|-
+| rowspan="4" | {{VerticalTextUp|Trivial}} || 1650 || Store || 30 || S=1 || &nbsp; || Store R1; clear R3
+|-
+| 1652 || Store clear || 30 || S=1 || &nbsp; || Clear R1, R3, and memory
+|-
+| S640 || Un-conditional transfer || 31 || &nbsp; || &nbsp; || Next instruction will be from 'b' (opposite phase from this one, if step bit is set); clear R3 || b is stored in R<sub>3</sub>
+|-
+| S660 || Conditional transfer || 32 || &nbsp; || &nbsp; || If R1 >= 0, then as above; if < 0, a [[no-op]]
+|-
+| rowspan="1" | {{VerticalTextUp|Special}} || 1711-1773 || Quick sum || 33 || S=1 || first || See entry in ''Final Progress Report''
+|-
+| rowspan="4" | {{VerticalTextUp|Non-memory}} || S500 || Right shift, no round off || 34 || SC || &nbsp; || Shift R1/R2 double-width register right N bits, ''always'' retaining sign bit in R1; copy old contents of R2 to R3 || N is given in bits 4-9, and must be > 0 and < 47; if C=0, no effect, if C=1 clear R1 before shift
+|-
+| S504 || Right shift, round off || 35 || SC || &nbsp; || Not implemented
+|-
+| S520 || Left shift || 35 || SC || &nbsp; || Shift R1 and R2 independently left N bits, with the sign bit of R1 copied into the low bit of both; copy old contents of R2 to R3 || As for 'right shift, no round off'; but if C=1, R1 is cleared after shift, and the sign bit of R1 is cleared before being copied to R2
+|-
+| S510-S572 || R<sub>2 to R<sub>1|| 36 || S || &nbsp; || Same as 'Summation' group, but the operand is in R2, not memory
+|-
+| rowspan="6" | {{VerticalTextUp|Input-output}} || 1200-1376 || IBM and drum priming || 37 || S || second || See entry in ''Final Progress Report'' || S is only recommended
+|-
+| 1010 || IBM input to memory || 39 || S=1 || first || Ditto; the second instruction in the word must be a [[jump]] to the next instruction
+|-
+| 1116 || IBM output to [sic] memory || 39 || S=1 || first || Ditto
+|-
+| 1210-1230 || Drum input to memory || 39 || S=1 || first || Ditto
+|-
+| 1316-1336 || Drum output from memory || 40 || S=1 || first || Ditto
+|}
+''NOTE: the document uses "digit" where we would now say 'bit'.''
+The [[operation code]]s are given in a table in the ''Final Progress Report'', but not in numeric form; and the column for each bit in the opcode has an individual name, not a number. It is not known if the columns are in numeric order; if they are, the step bit is in the bit number indicated elsewhere in the document (11), but the clear digit bit is not (it is given elsewhere as bit 18, but is 19 in the table). The opcodes are given above in octal, as if the bit columns in the ''Final Progress Report'' are in numeric order. The bit columns (numbered by apparent value, based on position) are labelled:
+{| class="wikitable"
+! Bit !! '0' Value !! '1' Value
+|-
+| 11 || No step || Step
+|-
+| 12 || Ext. || Int.
+|-
+| 13 || Arith. || Wms.
+|-
+| 14 || AT || NAT
+|-
+| 15 || # || Abs.
+|-
+| 16 || +R || -L
+|-
+| 17 || x/&#247; || &sum;
+|-
+| 18 || No RO || RO
+|-
+| 19 || Hold || Clear
+|-
+| 20 || colspan="2" style="text-align:center;" | Spare
+|}
 ==Copies==
@@ Line 36: / Line 144: @@
 * WEIZAC (Weizmann Institute, Israel) - October, 1955
-The [[IBM 701]] was apparently a 'cleaned up' copy as well, as were the [[EDB-2]] and [[EDB-3]] families built in Sweden from 1957 on, and the FACOM 201 (a copy of the MUSASINO-1) produced by Fujitsu from 1960.
+The [[IBM 701]] was apparently a 'cleaned up' copy as well (a different word length, with half-word addresses), as were the [[EDB-2]] and [[EDB-3]] families built in Sweden from 1957 on, and the FACOM 201 (a copy of the MUSASINO-1) produced by Fujitsu from 1960.
 Several other machines (such as the [[BESM 1]]) were built after close study of the IAS computer's documentation (and in the BESM 1's case, that of the BESK as well), but were not copies of it.
@@ Line 43: / Line 151: @@
 ==Further reading==
+===Books===
 * Herman H. Goldstine, ''The Computer from Pascal to von Neumann'', Princeton University, Princeton, 1972 - contains details of the entire effort, in which Goldstine participated
-* William Aspray, ''John von Neumann and the Origins of Modern Computing'', MIT Press, Cambridge, 1990
+* William Aspray, ''John von Neumann and the Origins of Modern Computing'', MIT Press, Cambridge, 1990 - not much technical detail, but a good overall history, and a lot about problem areas the machine was used for
-* Nicholas Metropolis, Jack Howlett, Gian-Carlo Rota (editors), [https://www.sciencedirect.com/book/9780124916500/a-history-of-computing-in-the-twentieth-century ''A History of Computing in the Twentieth Century''], Academic Press, New York, 1980 - the IAS computer is covered in the first section of Part IV; many descendants are covered in detail in other sections
+* Julian Bigelow ''Computer Development at the Institute for Advanced Study''; pp. 291-310 in Nicholas Metropolis, Jack Howlett, Gian-Carlo Rota (editors), [https://www.sciencedirect.com/book/9780124916500/a-history-of-computing-in-the-twentieth-century ''A History of Computing in the Twentieth Century''], Academic Press, New York, 1980 - the IAS computer is covered in the first section of Part IV, but with a focus on the electrical engineering; many descendants are covered in detail in other sections
 * George Dyson, ''Turing's Cathedral: The Origins of the Digital Universe'', Pantheon, New York, 2012 - focused on the creation of this machine at the Institute for Advanced Study
 * Raul Rojas, Ulf Hashagen, [https://doc.lagout.org/science/0_Computer%20Science/0_Computer%20History/The%20First%20Computers%20-%20History%20and%20Architectures.pdf ''The First Computers: History and Architectures''], MIT Press, Cambridge, 2002 - the IAS machine is covered in chapter II/4; no detail of the machine, but interesting coverage of the background and influence
 <!-- https://dokumen.pub/the-first-computers-history-and-architectures-9780262282529-0262282526-9780585355351-0585355355-0-262-18197-5.html -->
-* W. H. Ware, [http://bitsavers.trailing-edge.com/pdf/rand/P-377_The_History_And_Development_Of_The_IAS_Computer_Mar53.pdf ''The History and Development of the Electronic Computer Project at the Institute for Avanced Study''] (Rand Report P-377, March, 1953) - includes interesting detail of the electrical engineering design philosophy
-* John Deane, [https://archive.computerhistory.org/resources/access/text/2017/11/102693640-05-01-acc.pdf ''The IAS Computer Family Scrapbook''] - lists further information sources for each machine
+===Papers===
+* Arthur W. Burks, Herman H. Goldstine, John von Neumann, [https://www.cs.unc.edu/~adyilie/comp265/vonNeumann.html ''Preliminary discussion of the logical design of an electronic computing instrument''], Institute for Advanced Study, Princeton, June, 1946 - thoughts about the design of a computer - before any had ever been built!
+<!-- https://www.cs.princeton.edu/courses/archive/fall13/cos375/Burks.pdf -->
+* W. H. Ware, [http://bitsavers.trailing-edge.com/pdf/rand/P-377_The_History_And_Development_Of_The_IAS_Computer_Mar53.pdf ''The History and Development of the Electronic Computer Project at the Institute for Avanced Study''] (Rand Report P-377, March, 1953) - includes interesting detail of the electrical engineering design philosophy; implementation details of many of the 'copy' machines; and personnel notes
+* Gerald Estrin, [https://dl.acm.org/doi/pdf/10.1145/800259.809005 ''A description of the electronic computer at the Institute for Advanced Studies''], Proceedings of the 1952 ACM national meeting (Toronto), September 1952 - very complete, but low-level, description
+<!-- https://www.cs.unh.edu/~pjh/courses/cs520/05fall/p95-estrin.pdf -->
+* Nicholas Metropolis, J. Worlton, [https://www.osti.gov/servlets/purl/4628499 ''A Trilogy On Errors in the History of Computing''], Los Alamos National Laboratory, Los Alamos, 1972 - contains a section on the mis-identification of the IAS machine as the 'MANIAC'; also historical notes about both machines
+<!-- https://www.osti.gov/biblio/4628499 -->
 ==External links==
 * [http://www.bitsavers.org/pdf/ias/ IAS] - documentation at [[Bitsavers]] (skimpy)
-** [http://www.bitsavers.org/pdf/ias/IAS_Final_Report_Jan54.pdf ''Final Progress Report on the Physical Realization of an Electronic Computing Instrument''] - contains a lot of details on the mathematics, and a detailed list of instruction
+** [http://www.bitsavers.org/pdf/ias/IAS_Final_Report_Jan54.pdf ''Final Progress Report on the Physical Realization of an Electronic Computing Instrument''] - contains a lot of details on the mathematics, and a detailed list of instructions
+* John Deane, [https://archive.computerhistory.org/resources/access/text/2017/11/102693640-05-01-acc.pdf ''The IAS Computer Family Scrapbook''] - lists further information sources for each machine
 * [https://www.ias.edu/electronic-computer-project Electronic Computer Project]
 [[Category: Early Computers]]

Difference between revisions of "IAS computer"

Latest revision as of 15:10, 29 August 2024

Contents

Technical details

Instruction set

Copies

Further reading

Books

Papers

External links

Navigation menu

Views

Personal tools

Navigation

Search

Tools